Hello Sascha. There is only output from sdram-init binary, then silence.
shc@gentoo /home/ARM64/barebox/firmware $ ls -1hs rk3568* 396K rk3568-bl31.bin 4.0K rk3568-bl31.bin.gen.S 460K rk3568-bl31.bin.gen.pbl.o 4.0K rk3568-bl31.bin.sha.bin 64K rk3568-bl31.bin.z 456K rk3568-bl32.bin 4.0K rk3568-bl32.bin.gen.S 624K rk3568-bl32.bin.gen.pbl.o 4.0K rk3568-bl32.bin.sha.bin 168K rk3568-bl32.bin.z Can you compare them with your files? I understand the versions may differ, but the size should be roughly the same. Thanks! ср, 20 мая 2026 г. в 09:21, Sascha Hauer <[email protected]>: > > Hi Alexander, > > On 2026-05-20 08:15, Alexander Shiyan wrote: > > Hello Sascha. > > > > The first launch of the new release has failed. > > On the RK3568 platform, BL31 does not start. The size of the final > > binary has decreased from 1.5 MB > > to 930 KB - possibly due to the announced compression, but it seems to > > me that this is too > > large a reduction... > > Are there any additional settings/calls required for custom boards in > > the new release? > > No board level adjustments required. I just re-tested the relase on a > Rock-3a board using rockchip_v8_defconfig. It works here. > > The size reduction depends on the size of your firmware binaries. You > could look at the firmware/*.z files and compare with the original files > to see if that explains the size reduction. The TF-A and OP-TEE files > that I use only have around 700KiB in total, so a size reduction of > 600KiB would be unreasonable in my case. > > Do you have any console output to share? > > Sascha > > -- > Pengutronix e.K. | | > Steuerwalder Str. 21 | http://www.pengutronix.de/ | > 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
