Signed-off-by: Thorsten Scherer <[email protected]>
---
Documentation/boards/layerscape.rst | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/boards/layerscape.rst
b/Documentation/boards/layerscape.rst
index 5791b8632626..1467314954be 100644
--- a/Documentation/boards/layerscape.rst
+++ b/Documentation/boards/layerscape.rst
@@ -27,11 +27,11 @@ The barebox binary is expected to be located 4K bytes into
the SD-Card::
From there on, ``barebox_update`` can be used to flash
barebox to the QSPI NOR-Flash if required::
- barebox_update -t qspi /mnt/tftp/barebox-${global.hostname}-qspi.imaag
+ barebox_update -t qspi /mnt/tftp/barebox-${global.hostname}-qspi.image
Flashing to the eMMC is possible likewise::
- barebox_update -t sd /mnt/tftp/barebox-${global.hostname}-sd.imaag
+ barebox_update -t sd /mnt/tftp/barebox-${global.hostname}-sd.image
.. note:: Some SoCs like the LS1046A feature only a single eSDHC.
In such a case, using eMMC and SD-Card at the same time is not possible.
--
2.53.0
