Hello All. BL31 = rockchip bl31 from rkbin BL32 = tee.bin builded from https://github.com/OP-TEE/optee_os.git
DDR cb12b99cc23 hcy 25/10/17-18:57:13,fwver: v1.21 ... NOTICE: BL31: v2.3():v2.3-964-g8319968f5:derrick.huang, fwver: v1.54 NOTICE: BL31: Built : 17:20:23, Dec 26 2025 ... INFO: BL31: Initialising Exception Handling Framework INFO: BL31: Initializing runtime services INFO: BL31: Initializing BL32 INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0xb00000 INFO: SPSR = 0x3c9 barebox 2026.07.0-00839-g50ae8812b950-dirty #144 Tue Aug 11 14:39:36 MSK 2026 Board: Diasom DS-RK3588-BTB-EVB rockchip-dmc memory-controller.of: Detected memory size: 0x100000000 netconsole: registered as netconsole-1 fan53555-regulator rk86020: FAN53555 Option[10] Rev[1] Detected! vdd2_ddr: Bringing 500000uV into 1100000-1100000uV vddq_ddr: Bringing 500000uV into 600000-600000uV rockchip_saradc [email protected]: registered as aiodev0 BTB revision: 3 EVB revision: 2 EVB HAT Addon detected. arm-scmi firmware:scmi.of: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 optee: smc_abi: probing for conduit method. optee: smc_abi: revision 4.10 (71196403f6f9f642) ERROR: optee: smc_abi: driver requires OP-TEE dynamic shared memory support ERROR: optee firmware:optee.of: probe failed: Function not implemented psci psci.of: detected version 1.1 xHCI xHCI0: USB XHCI 1.10 ehci [email protected]: USB EHCI 1.00 ehci [email protected]: USB EHCI 1.00 xHCI xHCI1: USB XHCI 1.10 fan53555-regulator rk86021: FAN53555 Option[10] Rev[1] Detected! fan53555-regulator rk86030: FAN53555 Option[10] Rev[1] Detected! rtl8169_eth pci-10ec:8125.0: found RTL8125B (base=0x0000000a00000000) mdio_bus: miibus0: probed dw_mmc [email protected]: registered as mmc1 mmc1: detected SD card version 3.0 WARNING: mmc1: GPT:Primary header thinks Alt. header is not at the end of the disk. WARNING: mmc1: GPT:2976871 != 62333951 WARNING: mmc1: GPT:Alternate GPT header not at the end of the disk. WARNING: mmc1: GPT:2976871 != 62333951 mmc1: GPT: will repair later if global.system.gpt_refresh=1 mmc1: registered mmc1 rk3568-dwcmshc-sdhci [email protected]: registered as mmc0 mmc0: detected MMC card version 5.1 mmc0: registered mmc0.boot0 mmc0: registered mmc0.boot1 mmc0: registered mmc0 i2c3: Added multiplexed i2c bus 9 i2c3: Added multiplexed i2c bus 10 i2c3: Added multiplexed i2c bus 11 i2c3: Added multiplexed i2c bus 12 pca954x pca95460: registered 4 multiplexed busses for I2C switch xHCI xHCI2: USB XHCI 1.10 rockchip-dw-pcie [email protected]: Phy link never came up rtl8169_eth pci-10ec:8125.1: found RTL8125B (base=0x0000000980000000) mdio_bus: miibus1: probed Setup Machine ID from EMMC serial: 1815144414 nv variable modified, will save nv variables on shutdown malloc space: 0xb0000000 -> 0xedd0ffff (size 989.1 MiB) CAM0: No cameras detected. CAM1: Camera AR0234 detected. envfs: no envfs (magic mismatch) - envfs never written? eth1: Got preset MAC address from NVMEM: 80:34:28:75:d4:d4 eth0: Got preset MAC address from NVMEM: 80:34:28:75:cf:e7 Hit any to stop autoboot: 2 barebox@Diasom DS-RK3588-BTB-EVB-HAT:/ rksecure -i Failed to read secure boot info rksecure: No such device barebox@Diasom DS-RK3588-BTB-EVB-HAT:/ Am I missing something? The following lines confuse me, what is these line mean?: ERROR: optee: smc_abi: driver requires OP-TEE dynamic shared memory support ERROR: optee firmware:optee.of: probe failed: Function not implemented Thanks!
