The driver has only been probed from platform devices so far. Add the "mrvl,pxa-uart" compatible used by the upstream device trees.
The UART clock is still taken from pxa_get_uartclk() rather than from the clocks phandle as barebox has no clock driver for the PXA3xx clock controller the device trees point to. Assisted-by: Claude Opus 5 Signed-off-by: Sascha Hauer <[email protected]> --- drivers/serial/serial_pxa.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/serial/serial_pxa.c b/drivers/serial/serial_pxa.c index a0bebef811..bc792d62a5 100644 --- a/drivers/serial/serial_pxa.c +++ b/drivers/serial/serial_pxa.c @@ -187,8 +187,18 @@ static int pxa_serial_probe(struct device *dev) return 0; } +static __maybe_unused struct of_device_id pxa_serial_dt_ids[] = { + { + .compatible = "mrvl,pxa-uart", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, pxa_serial_dt_ids); + static struct driver pxa_serial_driver = { .name = "pxa_serial", .probe = pxa_serial_probe, + .of_compatible = DRV_OF_COMPAT(pxa_serial_dt_ids), }; console_platform_driver(pxa_serial_driver); -- 2.47.3
