From: Stefan Riedmueller <[email protected]> Change drive strength: - TXC 57 Ohm - TD0-3 76 Ohm - TX_CTL 76 Ohm
Remove pull ups from following pins so the won't interfere with strap pin latching of the PHY: - ENET_TX_CLK - RXC - RD0-3 - RX_CTL Signed-off-by: Stefan Riedmueller <[email protected]> Signed-off-by: Florijan Plohl <[email protected]> --- arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi | 24 ++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi index 60f7e2c14b..7199c416c8 100644 --- a/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi +++ b/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi @@ -79,6 +79,30 @@ pmic@58 { }; }; +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b018 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b018 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b018 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b018 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b018 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x180b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x180b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x180b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x180b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x180b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x180b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x180b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0 + >; + }; +}; + &m25p80 { status = "disabled"; -- 2.43.0
