Hello Mike, this looks like a hardware problem.
Please look into the output of "dmesg" if there are any scsi-related error messages. also, you could try to do a simple backup to your tape with tar, to see if that works or already not. Best regards, Philipp Am 14.02.2014 11:00, schrieb donmichelangel0: > Hello list, > > I am experiencing a major problem, because I am stuck at an actual easy task. > I am using a Tandberg Storageloader 1U LTO-5 SAS with a single tape drive and > CentOS 6.5 and the CentOS standard kernel in the latest version. > > I've set up my Pools, Storages, Devices (at least enough to run some small > tests, I think so...) et cetera but for some reason Bareos doesn't want to > properly label my tapes. > > However, this is not the only problem. After I've issued the label command > the entire server starts freezing for a couple of minutes and the last > bconsole message I can see is: > > block.c:998 Read error on fd=3 at file:blk 0:0 on device "LTO-5-Tapedrive" > (/dev/nst0). ERR=Eingabe-/Ausgabefehler. > > > So, did I misconfigure something, or did I miss something that I had to > configure as well, or do I encouter a bug? > > > > > Below you can find my bareos dir and sd configs as well as what I issued in > the bconsole: > > bareos-dir.conf: > https://gist.github.com/donmichelangelo/4fda4e99961b2a517d8d > > bareos-sd.conf: > https://gist.github.com/donmichelangelo/4a539e0bb4da6ce76735 > > bconsole output: > https://gist.github.com/donmichelangelo/fe049610e45ef6ff06fb > > > Maybe someone got a hint for me on what is going wrong? > > Kind regards > Mike > -- Mit freundlichen Grüßen Philipp Storz [email protected] Bareos GmbH & Co. KG Phone: Phone: +49221630693-92 http://www.bareos.com Fax: +49221630693-10 Sitz der Gesellschaft: Köln | Amtsgericht Köln: HRA 29646 Geschäftsführer: Stephan Dühr, M. Außendorf, J. Steffens, P. Storz, M. v. Wieringen -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
