Hi Philipp,
Am Freitag, 14. Februar 2014 11:13:26 UTC+1 schrieb philipp.storz: > Hello Mike, > > > > this looks like a hardware problem. > Probably it is... I've tried to write data onto the tape via tar. tar can write some files and folders but as soon as tar has apparently to write files greater than 1M, even my tar command starts freezing the server and restarts after 2-3 minutes... I've tried already two more kernels (3.10 and 3.12 aside of 2.6.32.431) but I suspect my Adapdreck HBA 1045 Controller that is causing these problems. Any recommendations for a proper HBA controller? Perhaps something like the LSI SAS 9207-4i4e? Kind regards, Mike > > > Please look into the output of "dmesg" if there are any scsi-related error > messages. > > > > also, you could try to do a simple backup to your tape with tar, to see if > that works or already not. > > > > Best regards, > > > > Philipp > > > > Am 14.02.2014 11:00, schrieb donmichelangel0: > > > Hello list, > > > > > > I am experiencing a major problem, because I am stuck at an actual easy > > task. > > > I am using a Tandberg Storageloader 1U LTO-5 SAS with a single tape drive > > and CentOS 6.5 and the CentOS standard kernel in the latest version. > > > > > > I've set up my Pools, Storages, Devices (at least enough to run some small > > tests, I think so...) et cetera but for some reason Bareos doesn't want to > > properly label my tapes. > > > > > > However, this is not the only problem. After I've issued the label command > > the entire server starts freezing for a couple of minutes and the last > > bconsole message I can see is: > > > > > > block.c:998 Read error on fd=3 at file:blk 0:0 on device "LTO-5-Tapedrive" > > (/dev/nst0). ERR=Eingabe-/Ausgabefehler. > > > > > > > > > So, did I misconfigure something, or did I miss something that I had to > > configure as well, or do I encouter a bug? > > > > > > > > > > > > > > > Below you can find my bareos dir and sd configs as well as what I issued in > > the bconsole: > > > > > > bareos-dir.conf: > > > https://gist.github.com/donmichelangelo/4fda4e99961b2a517d8d > > > > > > bareos-sd.conf: > > > https://gist.github.com/donmichelangelo/4a539e0bb4da6ce76735 > > > > > > bconsole output: > > > https://gist.github.com/donmichelangelo/fe049610e45ef6ff06fb > > > > > > > > > Maybe someone got a hint for me on what is going wrong? > > > > > > Kind regards > > > Mike > > > > > > > > > -- > > Mit freundlichen Grüßen > > > > Philipp Storz [email protected] > > Bareos GmbH & Co. KG Phone: Phone: +49221630693-92 > > http://www.bareos.com Fax: +49221630693-10 > > > > Sitz der Gesellschaft: Köln | Amtsgericht Köln: HRA 29646 > > Geschäftsführer: Stephan Dühr, M. Außendorf, > > J. Steffens, P. Storz, M. v. Wieringen -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
