Hello Adam, Am 23.01.2015 um 09:58 schrieb Adam Podstawka: > Hi, > > a bit old thread, but wanted to answer - because have again the problem with > a broken drive. :/ > > Am 26.03.14 um 10:07 schrieb Philipp Storz: >> there is the directive "Auto Select" that you can set to "no" in your device >> resource. >> Then this device will not be used by bareos for backup or restore. >> >> It think this is the easiest way to accomplish what you want. >> > > to answer this, with this the automatic "use a drive which is free" isn't > working - as i correctly > understand the manual.
Where is this documented? Have you tried if it works? So setting this for all drives will get me stuck in a "no drive will be used > automaticly for backups" situation? If you set it for all drives of course no drive will be left for backup. You should **only** set it **for the broken drive**. > >> Am 26.03.2014 07:54, schrieb Adam Podstawka: >>> we got a new big tapelib, but one of the 5 LTO6 Drives is defective. I have >>> tried to exclude it in >>> the Config till it gets repaired, but that doesn't work - bareos still puts >>> cartridges into Drive 1, >>> because it thinks its the Drive2 (since commented out Drive1). So is there >>> a better way to exclude >>> on runtime a drive from usage? >>> > > so i can't restart the storage-daemon to exclude the drive, when there are > jobs running, but have a > broken drive which needs to be deactivated, so any good suggestions for this? > > A Nice feature would be "disable drive X" :) Ok, will you send a patch that implements what you want, or do you have a budget to get it implemented? -- Mit freundlichen Grüßen Philipp Storz [email protected] Bareos GmbH & Co. KG Phone: Phone: +49221630693-92 http://www.bareos.com Fax: +49221630693-10 Sitz der Gesellschaft: Köln | Amtsgericht Köln: HRA 29646 Geschäftsführer: Stephan Dühr, M. Außendorf, J. Steffens, P. Storz, M. v. Wieringen -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. For more options, visit https://groups.google.com/d/optout.
