Hello there, I try to set up a single tape device, I can write an read from commandline and also get the status:
mt -f /dev/tape status SCSI 2 tape drive: File number=0, block number=0, partition=0. Tape block size 0 bytes. Density code 0x5c (no translation). Soft error count since last status=0 General status bits on (41010000): BOT ONLINE IM_REP_EN When I use in SD a device config with: Archive Device = /dev/tape the SD didn't start But using e.g. a disk path: Archive Device = /backup_spool/spool SD starts up. have also tried: Archive Device = /dev/st0 Archive Device = /dev/nst0 Bareos V 19.2.7.-2 What's going wrong? -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/bareos-users/c913988a-96da-4742-960b-c2cb7d16b393n%40googlegroups.com.
