Problem solved: "bareos-storage-tape" was not installed automaticly, after done it manually the SD starts.
Frank Cherry schrieb am Mittwoch, 23. Dezember 2020 um 10:25:33 UTC+1: > Hello there, > > I try to set up a single tape device, I can write an read from commandline > and also get the status: > > mt -f /dev/tape status > SCSI 2 tape drive: > File number=0, block number=0, partition=0. > Tape block size 0 bytes. Density code 0x5c (no translation). > Soft error count since last status=0 > General status bits on (41010000): > BOT ONLINE IM_REP_EN > > When I use in SD a device config with: > Archive Device = /dev/tape > > the SD didn't start > But using e.g. a disk path: > Archive Device = /backup_spool/spool > > SD starts up. > > have also tried: > Archive Device = /dev/st0 > Archive Device = /dev/nst0 > > Bareos V 19.2.7.-2 > > What's going wrong? > > > -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/bareos-users/6110bafc-c04b-4f25-8996-0f9467bf4a65n%40googlegroups.com.
