Hi,
This can happen if you did use this tape before.
I had this once, I had to low-level format the tape to make it work
fully again.
You can use commands like
btape raw
or the
itdt
tool.
Important is to NOT use "Maximum Volume Bytes" in your config.
Regards,
Birgit
On 05/01/21 09:35, 'Frank Cherry' via bareos-users wrote:
Hello there,
I use a LTO 7 ultrium tape (6 / 15 TB). On the tape "CRInc-0013"are two
jobs with 9.87 GB used space.
Bareos marked it as full:
Why?
Tape related logs from the 1st job:
bareos-sd JobId 33: Labeled new Volume "CRInc-0013" on device
"LTO7-Tape-Drive" (/dev/tape).
bareos-sd JobId 33: Wrote label to prelabeled Volume "CRInc-0013" on
device "LTO7-Tape-Drive" (/dev/tape)
bareos-sd JobId 33: Committing spooled data to Volume "CRInc-0013".
Despooling 9,873,485,603 bytes
the 2nd job:
bareos-sd JobId 38: Volume "CRInc-0013" previously written, moving to
end of data.
bareos-sd JobId 38: Ready to append to end of Volume "CRInc-0013" at file=1
bareos-sd JobId 38: Committing spooled data to Volume "CRInc-0013".
Despooling 3,399,163,731 bytes
bareos-sd JobId 38: Error: Error writing final EOF to tape. This Volume
may not be readable.
backends/generic_tape_device.cc:402 ioctl MTWEOF error on
"LTO7-Tape-Drive" (/dev/tape). ERR=Input/output error.
bareos-sd JobId 38: End of medium on Volume "CRInc-0013"
Bytes=9,871,755,264 Blocks=153,021 at 05-Jan-2021 08:26
bareos-sd JobId 38: Please mount append Volume "CRInc-0015" or label a
new one for:
Job: BackupStorage1Data.2021-01-05_06.51.59_02
Storage: "LTO7-Tape-Drive" (/dev/tape)
Pool: CR-Inc-Pool
Media type: LTO-7
Then the incrementiell backup was finished on a new tape.
The tape CRInc-0013 was manually recycled by doing this bash commands:
mt -f /dev/st0 rewind
mt -f /dev/st0 weof
mt -f /dev/st0 rewind
mt -f /dev/st0 status
status BOT = Begin of Tape was displayed finally.
Any ideas pleas?
Thanks, Frank
--
You received this message because you are subscribed to the Google
Groups "bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
To view this discussion on the web visit
https://groups.google.com/d/msgid/bareos-users/7a108ea2-f91e-4ce3-9bbb-5eca07d6e10bn%40googlegroups.com
<https://groups.google.com/d/msgid/bareos-users/7a108ea2-f91e-4ce3-9bbb-5eca07d6e10bn%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/bareos-users/41dd0043-e827-07af-46aa-ee01e0fc3b23%40unifr.ch.
