On Sun, May 13, 2007 at 05:39:30PM -0600, John Anderson wrote: > On 5/13/07, John Anderson <[EMAIL PROTECTED]> wrote: > > > >Hey, I have the blackberry pearl (8100) v4.2.0.73 Platform 2.2.0.4 and > >> when I run bcharge -o I get: > >> > >> Scanning for Blackberry devices... > >> Found device #003...adjusting charge setting...adjusting Pearl mode to > >> single...done > > > > > >I also forgot to mention, btool -l doesn't find the device. > > > > > This all seems too be in issue because I forgot to run the commands under > sudo, Once I ran it with sudo it set maxpower to 500mA and btool found the > device... But now the problem is the charging icon actually disappears when > I get it up to 500mA
Hi John, Thanks for your testing and feedback. You can setup udev or hotplug rules, depending on your system, to change the permissions of the devices so you don't need to be root. The latest CVS has the proper udev rules in the udev/ directory, if you want a starting point. Also, the binary packages should set this up for you automatically. As for the icon, I assume this is in the device itself. I don't believe bcharge has any control over whether it charges or not... only how much power it will draw. If you let the battery drain a bit, does it recharge again as expected? - Chris ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Barry-devel mailing list Barry-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/barry-devel
