Hi all,

I've had some very partial success.
Please see the /var/log/message output below.
This was acheived by pressing the wi-fi button on the front of the machine
at a very specific point (see the atkbd.c lines).
I haven't been able to reproduce this, so I'm sure that this is a firmware
insertion problem - see the firmware-helper output. But more significantly
the final piece of firmware initval06 was never removed as it normally is.

Larry, this was done before I got your patch, will try that later.

Thanks
Simon

Feb  2 01:15:13 localhost kernel: atkbd.c: Unknown key pressed (translated
set 2, code 0xb3 on isa0060/serio0).
Feb  2 01:15:13 localhost kernel: atkbd.c: Use 'setkeycodes e033
<keycode>' to make it known.
Feb  2 01:15:13 localhost kernel: atkbd.c: Unknown key released
(translated set 2, code 0xb3 on isa0060/serio0).
Feb  2 01:15:13 localhost kernel: atkbd.c: Use 'setkeycodes e033
<keycode>' to make it known.
Feb  2 01:15:39 localhost ntpd[3016]: kernel time sync enabled 0001
Feb  2 01:15:54 localhost kernel: bcm43xx: set security called
Feb  2 01:15:54 localhost kernel: bcm43xx:    .level = 0
Feb  2 01:15:54 localhost kernel: bcm43xx:    .enabled = 0
Feb  2 01:15:54 localhost kernel: bcm43xx:    .encrypt = 0
Feb  2 01:15:55 localhost default.hotplug[4602]: arguments (firmware) env
(PHYSDEVPATH=/devices/pci0000:00/0000:00:0b.0 SUBSYSTEM=firmware OLDPWD=/
DEVPATH=/class/firmware/0000:00:0b.0 FIRMWARE=bcm43xx_pcm5.fw ACTION=add
PWD=/etc/hotplug UDEV_LOG=3 TIMEOUT=60 UDEVD_EVENT=1 SHLVL=1
PHYSDEVDRIVER=bcm43xx driver 0.0.1 DEBUG=yes PHYSDEVBUS=pci SEQNUM=516
_=/bin/env)
Feb  2 01:15:55 localhost default.hotplug[4602]: invoke
/etc/hotplug/firmware.agent ()
Feb  2 01:15:55 localhost default.hotplug[4616]: arguments (firmware) env
(PHYSDEVPATH=/devices/pci0000:00/0000:00:0b.0 SUBSYSTEM=firmware OLDPWD=/
DEVPATH=/class/firmware/0000:00:0b.0 FIRMWARE=bcm43xx_pcm5.fw
ACTION=remove PWD=/etc/hotplug UDEV_LOG=3 TIMEOUT=60 UDEVD_EVENT=1
DEVNAME=/dev/0000:00:0b.0 SHLVL=1 PHYSDEVDRIVER=bcm43xx driver 0.0.1
DEBUG=yes PHYSDEVBUS=pci SEQNUM=517 _=/bin/env)
Feb  2 01:15:55 localhost default.hotplug[4616]: invoke
/etc/hotplug/firmware.agent ()
Feb  2 01:15:55 localhost default.hotplug[4633]: arguments (firmware) env
(PHYSDEVPATH=/devices/pci0000:00/0000:00:0b.0 SUBSYSTEM=firmware OLDPWD=/
DEVPATH=/class/firmware/0000:00:0b.0 FIRMWARE=bcm43xx_initval05.fw
ACTION=add PWD=/etc/hotplug UDEV_LOG=3 TIMEOUT=60 UDEVD_EVENT=1 SHLVL=1
PHYSDEVDRIVER=bcm43xx driver 0.0.1 DEBUG=yes PHYSDEVBUS=pci SEQNUM=518
_=/bin/env)
Feb  2 01:15:55 localhost default.hotplug[4633]: invoke
/etc/hotplug/firmware.agent ()
Feb  2 01:15:55 localhost default.hotplug[4645]: arguments (firmware) env
(PHYSDEVPATH=/devices/pci0000:00/0000:00:0b.0 SUBSYSTEM=firmware OLDPWD=/
DEVPATH=/class/firmware/0000:00:0b.0 FIRMWARE=bcm43xx_initval05.fw
ACTION=remove PWD=/etc/hotplug UDEV_LOG=3 TIMEOUT=60 UDEVD_EVENT=1
DEVNAME=/dev/0000:00:0b.0 SHLVL=1 PHYSDEVDRIVER=bcm43xx driver 0.0.1
DEBUG=yes PHYSDEVBUS=pci SEQNUM=519 _=/bin/env)
Feb  2 01:15:55 localhost kernel: bcm43xx: Radio turned on
Feb  2 01:15:55 localhost kernel: bcm43xx: Chip initialized
Feb  2 01:15:55 localhost kernel: bcm43xx: DMA initialized
Feb  2 01:15:55 localhost kernel: bcm43xx: 80211 cores initialized
Feb  2 01:15:55 localhost kernel: bcm43xx: Keys cleared
Feb  2 01:15:55 localhost kernel: ADDRCONF(NETDEV_UP): eth1: link is not
ready
Feb  2 01:15:55 localhost firmware_helper[4664]: Loading of
/lib/firmware/bcm43xx_microcode5.fw for bcm43xx driver 0.0.1 driver
failed: No such file or directory
Feb  2 01:15:55 localhost default.hotplug[4667]: arguments (firmware) env
(PHYSDEVPATH=/devices/pci0000:00/0000:00:0b.0 SUBSYSTEM=firmware OLDPWD=/
DEVPATH=/class/firmware/0000:00:0b.0 FIRMWARE=bcm43xx_microcode5.fw
ACTION=add PWD=/etc/hotplug UDEV_LOG=3 TIMEOUT=60 UDEVD_EVENT=1 SHLVL=1
PHYSDEVDRIVER=bcm43xx driver 0.0.1 DEBUG=yes PHYSDEVBUS=pci SEQNUM=514
_=/bin/env)
Feb  2 01:15:55 localhost default.hotplug[4667]: invoke
/etc/hotplug/firmware.agent ()
Feb  2 01:15:55 localhost default.hotplug[4675]: arguments (firmware) env
(PHYSDEVPATH=/devices/pci0000:00/0000:00:0b.0 SUBSYSTEM=firmware OLDPWD=/
DEVPATH=/class/firmware/0000:00:0b.0 FIRMWARE=bcm43xx_initval06.fw
ACTION=remove PWD=/etc/hotplug UDEV_LOG=3 TIMEOUT=60 UDEVD_EVENT=1
DEVNAME=/dev/0000:00:0b.0 SHLVL=1 PHYSDEVDRIVER=bcm43xx driver 0.0.1
DEBUG=yes PHYSDEVBUS=pci SEQNUM=521 _=/bin/env)
Feb  2 01:15:55 localhost default.hotplug[4675]: invoke
/etc/hotplug/firmware.agent ()
Feb  2 01:15:55 localhost default.hotplug[4593]: arguments (firmware) env
(PHYSDEVPATH=/devices/pci0000:00/0000:00:0b.0 SUBSYSTEM=firmware OLDPWD=/
DEVPATH=/class/firmware/0000:00:0b.0 FIRMWARE=bcm43xx_microcode5.fw
ACTION=remove PWD=/etc/hotplug UDEV_LOG=3 TIMEOUT=60 UDEVD_EVENT=1
DEVNAME=/dev/0000:00:0b.0 SHLVL=1 PHYSDEVDRIVER=bcm43xx driver 0.0.1
DEBUG=yes PHYSDEVBUS=pci SEQNUM=515 _=/bin/env)
Feb  2 01:15:55 localhost default.hotplug[4593]: invoke
/etc/hotplug/firmware.agent ()
Feb  2 01:15:55 localhost kernel: bcm43xx: set security called
Feb  2 01:15:55 localhost kernel: bcm43xx:    .level = 0
Feb  2 01:15:55 localhost kernel: bcm43xx:    .enabled = 0
Feb  2 01:15:55 localhost kernel: bcm43xx:    .encrypt = 0
Feb  2 01:15:55 localhost kernel: bcm43xx: set security called
Feb  2 01:15:55 localhost kernel: bcm43xx:    .level = 0
Feb  2 01:15:55 localhost kernel: bcm43xx:    .enabled = 0
Feb  2 01:15:55 localhost kernel: bcm43xx:    .encrypt = 0
Feb  2 01:15:55 localhost kernel: bcm43xx: set security called
Feb  2 01:15:55 localhost kernel: bcm43xx:    .level = 0
Feb  2 01:15:55 localhost kernel: bcm43xx:    .enabled = 0
Feb  2 01:15:55 localhost kernel: bcm43xx:    .encrypt = 0
Feb  2 01:15:55 localhost kernel: bcm43xx: set security called
Feb  2 01:15:55 localhost kernel: bcm43xx:    .level = 0
Feb  2 01:15:55 localhost kernel: bcm43xx:    .enabled = 0
Feb  2 01:15:55 localhost kernel: bcm43xx:    .encrypt = 0
Feb  2 01:15:55 localhost default.hotplug[4658]: arguments (firmware) env
(PHYSDEVPATH=/devices/pci0000:00/0000:00:0b.0 SUBSYSTEM=firmware OLDPWD=/
DEVPATH=/class/firmware/0000:00:0b.0 FIRMWARE=bcm43xx_initval06.fw
ACTION=add PWD=/etc/hotplug UDEV_LOG=3 TIMEOUT=60 UDEVD_EVENT=1 SHLVL=1
PHYSDEVDRIVER=bcm43xx driver 0.0.1 DEBUG=yes PHYSDEVBUS=pci SEQNUM=520
_=/bin/env)
Feb  2 01:15:55 localhost default.hotplug[4645]: invoke
/etc/hotplug/firmware.agent ()
Feb  2 01:15:55 localhost default.hotplug[4658]: invoke
/etc/hotplug/firmware.agent ()
Feb  2 01:15:56 localhost dhclient: DHCPDISCOVER on eth1 to
255.255.255.255 port 67 interval 5
Feb  2 01:15:59 localhost kernel: SoftMAC: Open Authentication completed
with 00:11:95:3a:3f:b1
Feb  2 01:15:59 localhost kernel: ADDRCONF(NETDEV_CHANGE): eth1: link
becomes ready
Feb  2 01:15:59 localhost kernel: bcm43xx: set security called
Feb  2 01:15:59 localhost kernel: bcm43xx:    .active_key = 0
Feb  2 01:15:59 localhost kernel: bcm43xx:    .level = 2
Feb  2 01:15:59 localhost kernel: bcm43xx:    .enabled = 1
Feb  2 01:15:59 localhost kernel: bcm43xx:    .encrypt = 1
Feb  2 01:15:59 localhost kernel: bcm43xx: set security called
Feb  2 01:15:59 localhost kernel: bcm43xx:    .active_key = 0
Feb  2 01:15:59 localhost kernel: bcm43xx:    .level = 2
Feb  2 01:15:59 localhost kernel: bcm43xx:    .enabled = 1
Feb  2 01:15:59 localhost kernel: bcm43xx:    .encrypt = 1
Feb  2 01:16:00 localhost kernel: bcm43xx: set security called
Feb  2 01:16:00 localhost kernel: bcm43xx:    .active_key = 0
Feb  2 01:16:00 localhost kernel: bcm43xx:    .level = 2
Feb  2 01:16:00 localhost kernel: bcm43xx:    .enabled = 1
Feb  2 01:16:00 localhost kernel: bcm43xx:    .encrypt = 1
Feb  2 01:16:01 localhost dhclient: DHCPDISCOVER on eth1 to
255.255.255.255 port 67 interval 8
Feb  2 01:16:01 localhost kernel: bcm43xx: set security called
Feb  2 01:16:01 localhost kernel: bcm43xx:    .active_key = 0
Feb  2 01:16:01 localhost kernel: bcm43xx:    .level = 2
Feb  2 01:16:01 localhost kernel: bcm43xx:    .enabled = 1
Feb  2 01:16:01 localhost kernel: bcm43xx:    .encrypt = 1
Feb  2 01:16:02 localhost kernel: DEAUTH from AP
Feb  2 01:16:03 localhost kernel: SoftMAC: Open Authentication completed
with 00:11:95:3a:3f:b1
Feb  2 01:16:06 localhost kernel: DEAUTH from AP
Feb  2 01:16:06 localhost last message repeated 2 times
Feb  2 01:16:09 localhost dhclient: DHCPDISCOVER on eth1 to
255.255.255.255 port 67 interval 10
Feb  2 01:16:09 localhost kernel: bcm43xx: set security called
Feb  2 01:16:09 localhost kernel: bcm43xx:    .level = 0
Feb  2 01:16:09 localhost kernel: bcm43xx:    .enabled = 0
Feb  2 01:16:09 localhost kernel: bcm43xx:    .encrypt = 0
Feb  2 01:16:09 localhost kernel: bcm43xx: set security called
Feb  2 01:16:09 localhost kernel: bcm43xx:    .level = 0
Feb  2 01:16:09 localhost kernel: bcm43xx:    .enabled = 0
Feb  2 01:16:09 localhost kernel: bcm43xx:    .encrypt = 0
Feb  2 01:16:09 localhost kernel: bcm43xx: set security called
Feb  2 01:16:09 localhost kernel: bcm43xx:    .level = 0
Feb  2 01:16:09 localhost kernel: bcm43xx:    .enabled = 0
Feb  2 01:16:09 localhost kernel: bcm43xx:    .encrypt = 0
Feb  2 01:16:09 localhost kernel: bcm43xx: set security called
Feb  2 01:16:09 localhost kernel: bcm43xx:    .level = 0
Feb  2 01:16:09 localhost kernel: bcm43xx:    .enabled = 0
Feb  2 01:16:09 localhost kernel: bcm43xx:    .encrypt = 0
Feb  2 01:16:19 localhost dhclient: DHCPDISCOVER on eth1 to
255.255.255.255 port 67 interval 18
Feb  2 01:16:23 localhost su(pam_unix)[4795]: session opened for user root
by (uid=500)
Feb  2 01:16:31 localhost kernel: SoftMAC: Open Authentication completed
with 00:11:95:3a:3f:b1
Feb  2 01:16:35 localhost kernel: DEAUTH from AP
Feb  2 01:16:35 localhost kernel: SoftMAC: Open Authentication completed
with 00:11:95:3a:3f:b1
Feb  2 01:16:37 localhost dhclient: DHCPDISCOVER on eth1 to
255.255.255.255 port 67 interval 15
Feb  2 01:16:39 localhost kernel: DEAUTH from AP


_______________________________________________
Bcm43xx-dev mailing list
[email protected]
http://lists.berlios.de/mailman/listinfo/bcm43xx-dev

Reply via email to