Bin Zhang schrieb:
On 4/1/06, Thomas Ploch <[EMAIL PROTECTED]> wrote:
Hello all,
Written by Bin Zhang:
With the very good surprise, it works with WPA and in a simple way:
the only thing to do is to modprobe bcm43xx and to configure
wpa_supplicant, I don't need to make the other iwconfig or iwlist.
With the debian unstable (wpasupplicant 0.4.8-1), I put in
/etc/network/interfaces
iface eth1 inet dhcp
wpa-conf/home/user/.wpa/wpa_supplicant.conf
pre-up modprobe bcm43xx
post-down modprobe -r bcm43xx
and use "ifup/ifdown eth1".
Yes, its pretty easy that way, I can even get an IP-Address on boot,
the only thing that is concerning me, is that with wpa_supplicant, I dont get
more
than 24 kb/s on a __16Mb__ line. Is there a possible explanantion for that?
I have just discovered that I have also this problem. I get about
35kb/s with softmac. (I can get about 145 kb/s with dscape, it's the
max on my adsl line).
Regards,
Bin
Well, I use debian/unstable on an iBook G4 1.33GH with all-in-one softmac
2.6.16 kernel.
And I am going to switch to dscape until this problem is solved. It seems that
its a wpa_supplicant related problem, since my softmac-stack
is working properly for WEP-encrypted networks.
Thomas
_______________________________________________
Bcm43xx-dev mailing list
[email protected]
http://lists.berlios.de/mailman/listinfo/bcm43xx-dev
