Larry Finger wrote:
If you do an 'iwlist s', what do you see? It seems that you have debugging
turned on in SoftMAC, but
I see no indication that anything attempted to scan.
The output from iwlist -s is attached, as is the complete dmesg log.
Scanning works fine (actually better than when I'm using ndiswrapper or
windows) but nothing connects.
If you need anything else just ask.
-Ryan Hurley
[ 0.000000] Linux version 2.6.19.1 ([EMAIL PROTECTED]) (gcc version 4.1.2
20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #1 SMP Sat Jan 13 14:48:50 EST
2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bf10000 (usable)
[ 0.000000] BIOS-e820: 000000001bf10000 - 000000001bf19000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001bf19000 - 000000001bf80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bf80000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 447MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f8790
[ 0.000000] Entering add_active_range(0, 0, 114448) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114448
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114448
[ 0.000000] On node 0 totalpages: 114448
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 862 pages used for memmap
[ 0.000000] Normal zone: 109490 pages, LIFO batch:31
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 HP ) @
0x000f87c0
[ 0.000000] ACPI: RSDT (v001 HP 30B5 0x06040000 LTP 0x00000000) @
0x1bf131f0
[ 0.000000] ACPI: FADT (v001 HP 30B5 0x06040000 PTL_ 0x000f4240) @
0x1bf18d52
[ 0.000000] ACPI: MCFG (v001 HP 30B5 0x06040000 LTP 0x00000000) @
0x1bf18dc6
[ 0.000000] ACPI: MADT (v001 HP 30B5 0x06040000 LTP 0x00000000) @
0x1bf18e02
[ 0.000000] ACPI: BOOT (v001 HP 30B5 0x06040000 LTP 0x00000001) @
0x1bf18e56
[ 0.000000] ACPI: SSDT (v001 HP 30B5 0x06040000 LTP 0x00000001) @
0x1bf18e7e
[ 0.000000] ACPI: DSDT (v001 HP 30B5 0x06040000 MSFT 0x0100000e) @
0x00000000
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:8 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:8 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
20000000:c0000000)
[ 0.000000] Detected 1607.434 MHz processor.
[ 15.642620] Built 1 zonelists. Total pages: 113554
[ 15.642622] Kernel command line: root=/dev/sda3 ro quiet splash
[ 15.642812] mapped APIC to ffffd000 (fee00000)
[ 15.642815] mapped IOAPIC to ffffc000 (fec00000)
[ 15.642818] Enabling fast FPU save and restore... done.
[ 15.642820] Enabling unmasked SIMD FPU exception support... done.
[ 15.642823] Initializing CPU#0
[ 15.642886] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 15.642968] spurious 8259A interrupt: IRQ7.
[ 15.647298] Console: colour VGA+ 80x25
[ 15.647450] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.647665] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 15.655524] Memory: 445788k/457792k available (3372k kernel code, 11416k
reserved, 1362k data, 236k init, 0k highmem)
[ 15.655534] virtual kernel memory layout:
[ 15.655536] fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB)
[ 15.655537] vmalloc : 0xdc800000 - 0xfffb5000 ( 567 MB)
[ 15.655539] lowmem : 0xc0000000 - 0xdbf10000 ( 447 MB)
[ 15.655540] .init : 0xc05a7000 - 0xc05e2000 ( 236 kB)
[ 15.655542] .data : 0xc044b05d - 0xc059fbcc (1362 kB)
[ 15.655543] .text : 0xc0100000 - 0xc044b05d (3372 kB)
[ 15.655547] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 15.714873] Calibrating delay using timer specific routine.. 3216.77
BogoMIPS (lpj=1608389)
[ 15.714909] Security Framework v1.0.0 initialized
[ 15.714913] SELinux: Disabled at boot.
[ 15.714926] Mount-cache hash table entries: 512
[ 15.715029] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000
00000000 00002001 00000000 0000001f
[ 15.715038] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 15.715041] CPU: L2 Cache: 256K (64 bytes/line)
[ 15.715043] CPU 0(2) -> Core 0
[ 15.715046] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410
00002001 00000000 0000001f
[ 15.715055] Compat vDSO mapped to ffffe000.
[ 15.715063] Checking 'hlt' instruction... OK.
[ 15.719000] Freeing SMP alternatives: 20k freed
[ 15.719003] ACPI: Core revision 20060707
[ 15.736242] CPU0: AMD Turion(tm) 64 X2 stepping 02
[ 15.736260] Booting processor 1/1 eip 2000
[ 15.748770] Initializing CPU#1
[ 15.809106] Calibrating delay using timer specific routine.. 3214.18
BogoMIPS (lpj=1607093)
[ 15.809112] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000
00000000 00002001 00000000 0000001f
[ 15.809119] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 15.809122] CPU: L2 Cache: 256K (64 bytes/line)
[ 15.809124] CPU 1(2) -> Core 1
[ 15.809126] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410
00002001 00000000 0000001f
[ 15.806971] CPU1: AMD Turion(tm) 64 X2 stepping 02
[ 15.806986] Total of 2 processors activated (6430.96 BogoMIPS).
[ 15.807388] ENABLING IO-APIC IRQs
[ 15.807662] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 15.918825] checking TSC synchronization across 2 CPUs:
[ 0.000001] CPU#0 had -1130 usecs TSC skew, fixed it up.
[ 0.000004] CPU#1 had 1130 usecs TSC skew, fixed it up.
[ 0.000998] Brought up 2 CPUs
[ 0.038089] migration_cost=132
[ 0.038216] checking if image is initramfs... it is
[ 0.255083] Freeing initrd memory: 1953k freed
[ 0.255351] NET: Registered protocol family 16
[ 0.255428] ACPI: bus type pci registered
[ 0.255437] PCI: Using MMCONFIG
[ 0.255480] PCI: No mmconfig possible on 0:18
[ 0.256082] Setting up standard PCI resources
[ 0.264865] ACPI: Interpreter enabled
[ 0.264870] ACPI: Using IOAPIC for interrupt routing
[ 0.265627] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.265632] PCI: Probing PCI hardware (bus 00)
[ 0.265757] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 0.270356] Boot video device is 0000:00:05.0
[ 0.271329] PCI: Transparent bridge - 0000:00:10.0
[ 0.271364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.366793] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.367477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 0.367656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 0.368073] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23)
*0, disabled.
[ 0.368442] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23)
*10
[ 0.368805] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0,
disabled.
[ 0.369181] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0,
disabled.
[ 0.369542] ACPI: PCI Interrupt Link [LK1E] (IRQs 20) *0, disabled.
[ 0.369908] ACPI: PCI Interrupt Link [LK2E] (IRQs 19) *10
[ 0.370266] ACPI: PCI Interrupt Link [LK3E] (IRQs 21) *10
[ 0.370625] ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23)
*0, disabled.
[ 0.371008] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23)
*10
[ 0.371382] ACPI: PCI Interrupt Link [LSMU] (IRQs 16 17 18 19 20 21 22 23)
*11
[ 0.371742] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23)
*11
[ 0.372110] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *7
[ 0.372470] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23)
*11
[ 0.372840] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23)
*0, disabled.
[ 0.373215] ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 19 20 21 22 23)
*0, disabled.
[ 0.373578] ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 19 20 21 22 23)
*0, disabled.
[ 0.373947] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23)
*0, disabled.
[ 0.374320] ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *5
[ 0.374687] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23)
*0, disabled.
[ 0.374834] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.374843] pnp: PnP ACPI init
[ 0.377905] pnp: PnP ACPI: found 11 devices
[ 0.378066] SCSI subsystem initialized
[ 0.378127] libata version 2.00 loaded.
[ 0.378188] usbcore: registered new interface driver usbfs
[ 0.378214] usbcore: registered new interface driver hub
[ 0.378248] usbcore: registered new device driver usb
[ 0.378279] PCI: Using ACPI for IRQ routing
[ 0.378283] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 0.378900] pnp: 00:03: ioport range 0x1000-0x107f could not be reserved
[ 0.378904] pnp: 00:03: ioport range 0x1080-0x10ff has been reserved
[ 0.378907] pnp: 00:03: ioport range 0x1400-0x147f has been reserved
[ 0.378910] pnp: 00:03: ioport range 0x1480-0x14ff could not be reserved
[ 0.378913] pnp: 00:03: ioport range 0x1800-0x187f has been reserved
[ 0.378916] pnp: 00:03: ioport range 0x1880-0x18ff has been reserved
[ 0.378919] pnp: 00:03: ioport range 0x2000-0x203f has been reserved
[ 0.379131] PCI: Bridge: 0000:00:02.0
[ 0.379133] IO window: disabled.
[ 0.379137] MEM window: c3000000-c30fffff
[ 0.379140] PREFETCH window: disabled.
[ 0.379142] PCI: Bridge: 0000:00:03.0
[ 0.379145] IO window: 4000-4fff
[ 0.379149] MEM window: c8000000-c87fffff
[ 0.379151] PREFETCH window: disabled.
[ 0.379154] PCI: Bridge: 0000:00:10.0
[ 0.379155] IO window: disabled.
[ 0.379160] MEM window: disabled.
[ 0.379163] PREFETCH window: disabled.
[ 0.379177] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.379185] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 0.379196] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 0.379228] NET: Registered protocol family 2
[ 0.390940] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.391028] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.391145] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.391207] TCP: Hash tables configured (established 16384 bind 8192)
[ 0.391210] TCP reno registered
[ 0.391345] Simple Boot Flag at 0x36 set to 0x1
[ 0.556000] audit: initializing netlink socket (disabled)
[ 0.556000] audit(1168779637.851:1): initialized
[ 0.557000] Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
[ 0.557000] NTFS driver 2.1.27 [Flags: R/O].
[ 0.557000] io scheduler noop registered
[ 0.557000] io scheduler cfq registered (default)
[ 0.568000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.568000] pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor
BIOS
[ 0.568000] assign_interrupt_mode Found MSI capability
[ 0.568000] Allocate Port Service[0000:00:02.0:pcie00]
[ 0.568000] Allocate Port Service[0000:00:02.0:pcie03]
[ 0.568000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 0.568000] pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor
BIOS
[ 0.568000] assign_interrupt_mode Found MSI capability
[ 0.568000] Allocate Port Service[0000:00:03.0:pcie00]
[ 0.568000] Allocate Port Service[0000:00:03.0:pcie03]
[ 0.568000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.568000] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.568000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.569000] ACPI: AC Adapter [ADP1] (on-line)
[ 0.611000] ACPI: Battery Slot [BAT0] (battery present)
[ 0.611000] ACPI: Power Button (FF) [PWRF]
[ 0.611000] ACPI: Lid Switch [LID0]
[ 0.611000] ACPI: Sleep Button (CM) [SLPB]
[ 0.611000] ACPI: Power Button (CM) [PWRB]
[ 0.611000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 0.611000] Using specific hotkey driver
[ 0.611000] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.611000] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.623000] ACPI: Thermal Zone [TZS0] (44 C)
[ 0.628000] ACPI: Thermal Zone [TZS1] (47 C)
[ 0.649000] Real Time Clock Driver v1.12ac
[ 0.649000] Linux agpgart interface v0.101 (c) Dave Jones
[ 0.649000] [drm] Initialized drm 1.0.1 20051102
[ 0.650000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 0.650000] loop: loaded (max 8 devices)
[ 0.650000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version
0.57.
[ 0.650000] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 0.650000] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 23
(level, high) -> IRQ 16
[ 0.651000] PCI: Setting latency timer of device 0000:00:14.0 to 64
[ 0.651000] forcedeth: using HIGHDMA
[ 1.163000] eth0: forcedeth.c: subsystem: 0103c:30b5 bound to 0000:00:14.0
[ 1.163000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.163000] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 1.163000] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
[ 1.163000] NFORCE-MCP51: chipset revision 241
[ 1.163000] NFORCE-MCP51: not 100% native mode: will probe irqs later
[ 1.163000] NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller
[ 1.163000] ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:pio,
hdb:pio
[ 1.163000] ide1: BM-DMA at 0x3088-0x308f, BIOS settings: hdc:pio,
hdd:pio
[ 1.163000] Probing IDE interface ide0...
[ 1.682000] Probing IDE interface ide1...
[ 2.354000] hdc: PHILIPS CD-RW/DVD-ROM SCB5265, ATAPI CD/DVD-ROM drive
[ 2.966000] ide1 at 0x170-0x177,0x376 on irq 15
[ 2.966000] Probing IDE interface ide0...
[ 3.486000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA
[ 3.486000] Uniform CD-ROM driver Revision: 3.20
[ 3.492000] Loading iSCSI transport class v2.0-724.<7>sata_nv 0000:00:0e.0:
version 2.0
[ 3.492000] PCI: Enabling device 0000:00:0e.0 (0005 -> 0007)
[ 3.492000] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
[ 3.492000] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 22
(level, high) -> IRQ 17
[ 3.492000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 3.492000] ata1: SATA max UDMA/133 cmd 0x30B0 ctl 0x30A6 bmdma 0x3090 irq 17
[ 3.492000] ata2: SATA max UDMA/133 cmd 0x30A8 ctl 0x30A2 bmdma 0x3098 irq 17
[ 3.492000] scsi0 : sata_nv
[ 3.949000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.950000] ata1.00: ATA-7, max UDMA/100, 78165360 sectors: LBA48
[ 3.950000] ata1.00: ata1: dev 0 multi count 16
[ 3.954000] ata1.00: configured for UDMA/100
[ 3.954000] scsi1 : sata_nv
[ 4.257000] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.268000] ATA: abnormal status 0x7F on port 0x30AF
[ 4.268000] scsi 0:0:0:0: Direct-Access ATA ST94813AS 7.24
PQ: 0 ANSI: 5
[ 4.268000] SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)
[ 4.268000] sda: Write Protect is off
[ 4.268000] sda: Mode Sense: 00 3a 00 00
[ 4.268000] SCSI device sda: drive cache: write back
[ 4.268000] SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)
[ 4.268000] sda: Write Protect is off
[ 4.268000] sda: Mode Sense: 00 3a 00 00
[ 4.268000] SCSI device sda: drive cache: write back
[ 4.268000] sda: sda1 sda2 sda3
[ 4.364000] sd 0:0:0:0: Attached scsi disk sda
[ 4.364000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.365000] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
[ 4.365000] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 21
(level, high) -> IRQ 18
[ 4.365000] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[ 4.365000] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 4.365000] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus
number 1
[ 4.365000] ehci_hcd 0000:00:0b.1: debug port 1
[ 4.365000] PCI: cache line size of 64 is not supported by device
0000:00:0b.1
[ 4.365000] ehci_hcd 0000:00:0b.1: irq 18, io mem 0xc0005000
[ 4.365000] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 4.365000] usb usb1: configuration #1 chosen from 1 choice
[ 4.365000] hub 1-0:1.0: USB hub found
[ 4.365000] hub 1-0:1.0: 8 ports detected
[ 4.466000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Driver (PCI)
[ 4.466000] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
[ 4.466000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 20
(level, high) -> IRQ 19
[ 4.466000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 4.466000] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 4.466000] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus
number 2
[ 4.466000] ohci_hcd 0000:00:0b.0: irq 19, io mem 0xc0004000
[ 4.519000] usb usb2: configuration #1 chosen from 1 choice
[ 4.519000] hub 2-0:1.0: USB hub found
[ 4.519000] hub 2-0:1.0: 8 ports detected
[ 4.620000] USB Universal Host Controller Interface driver v3.0
[ 4.620000] Initializing USB Mass Storage driver...
[ 4.620000] usbcore: registered new interface driver usb-storage
[ 4.620000] USB Mass Storage support registered.
[ 4.620000] usbcore: registered new interface driver libusual
[ 4.620000] usbcore: registered new interface driver hiddev
[ 4.620000] usbcore: registered new interface driver usbhid
[ 4.620000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 4.620000] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 4.620000] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 4.620000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.620000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 4.620000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 4.620000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 4.620000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 4.620000] mice: PS/2 mouse device common for all mice
[ 4.620000] input: PC Speaker as /class/input/input0
[ 4.620000] Advanced Linux Sound Architecture Driver Version 1.0.13 (Tue Nov
28 14:07:24 2006 UTC).
[ 4.621000] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 19
[ 4.621000] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 19
(level, high) -> IRQ 20
[ 4.621000] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 4.623000] input: AT Translated Set 2 keyboard as /class/input/input1
[ 4.719000] ALSA device list:
[ 4.719000] #0: HDA NVidia at 0xc0000000 irq 20
[ 4.719000] IPv4 over IPv4 tunneling driver
[ 4.719000] GRE over IPv4 tunneling driver
[ 4.719000] TCP cubic registered
[ 4.719000] Initializing XFRM netlink socket
[ 4.719000] NET: Registered protocol family 1
[ 4.719000] NET: Registered protocol family 17
[ 4.719000] NET: Registered protocol family 15
[ 4.719000] powernow-k8: Found 2 AMD Turion(tm) 64 X2 processors (version
2.00.00)
[ 4.719000] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x12
[ 4.719000] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e
[ 4.719000] Starting balanced_irq
[ 4.719000] Using IPI Shortcut mode
[ 4.719000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 4.719000] Freeing unused kernel memory: 236k freed
[ 4.720000] Time: acpi_pm clocksource has been installed.
[ 6.159000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps:
0xa04713/0x200000
[ 6.191000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 6.193000] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
[ 6.391000] kjournald starting. Commit interval 5 seconds
[ 6.392000] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.355000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps:
0xa04713/0x200000
[ 7.387000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 16.603000] eth0: no link during initialization.
[ 17.325000] ndiswrapper version 1.33 loaded (preempt=no,smp=yes)
[ 17.406000] ndiswrapper: driver bcmwl5 (Broadcom,03/23/2006, 4.40.19.0)
loaded
[ 17.407000] ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 19
[ 17.407000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LK2E] -> GSI 19
(level, high) -> IRQ 20
[ 17.407000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 17.413000] ndiswrapper: using IRQ 20
[ 18.103000] wlan0: ethernet device 00:14:a5:fd:91:3a using NDIS driver:
bcmwl5, version: 0x4281300, NDIS version: 0x501, vendor: '', 14E4:4312.5.conf
[ 18.103000] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2,
WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 18.103000] usbcore: registered new interface driver ndiswrapper
[ 18.108000] ndiswrapper: changing interface name from 'wlan0' to 'eth1'
[ 18.172000] Adding 506036k swap on
/dev/disk/by-uuid/54eb9453-65ab-4c4d-b89d-88493b86009e. Priority:-1 extents:1
across:506036k
[ 18.271000] EXT3 FS on sda3, internal journal
[ 18.459000] NTFS volume version 3.1.
[ 31.137000] Capability LSM initialized
[ 59.472000] ndiswrapper: device eth1 removed
[ 59.472000] ACPI: PCI interrupt for device 0000:01:00.0 disabled
[ 59.472000] usbcore: deregistering interface driver ndiswrapper
[ 68.204000] ieee80211_crypt: registered algorithm 'NULL'
[ 68.208000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 68.208000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL
PROTECTED]>
[ 68.234000] bcm43xx driver
[ 68.235000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LK2E] -> GSI 19
(level, high) -> IRQ 20
[ 68.235000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 68.242000] bcm43xx: Chip ID 0x4311, rev 0x1
[ 68.242000] bcm43xx: Number of cores: 4
[ 68.242000] bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243, enabled
[ 68.242000] bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243, disabled
[ 68.242000] bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243, disabled
[ 68.242000] bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243, enabled
[ 68.244000] bcm43xx: PHY connected
[ 68.244000] bcm43xx: Detected PHY: Version: 4, Type 2, Revision 8
[ 68.245000] bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev:
2)
[ 68.245000] bcm43xx: Radio turned off
[ 68.245000] bcm43xx: Radio turned off
[ 68.314000] bcm43xx: PHY connected
[ 68.427000] bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27)
[ 68.435000] bcm43xx: Radio turned on
[ 68.435000] bcm43xx: Radio enabled by hardware
[ 68.620000] bcm43xx: Chip initialized
[ 68.621000] bcm43xx: 32-bit DMA initialized
[ 68.621000] bcm43xx: Keys cleared
[ 68.621000] bcm43xx: Selected 802.11 core (phytype 2)
[ 70.595000] bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt
= 0
[ 71.627000] bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt
= 0
[ 71.627000] bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt
= 0
[ 71.627000] bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt
= 0
[ 71.627000] bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt
= 0
[ 130.867000] bcm43xx: Radio turned off
[ 130.867000] bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64
[ 130.867000] bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
[ 130.867000] bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
[ 130.868000] bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
[ 130.868000] bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512
[ 130.868000] bcm43xx: DMA-32 0x0220 (TX) max used slots: 3/512
[ 130.869000] bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512
[ 132.885000] bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt
= 0
[ 133.019000] bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27)
[ 133.027000] bcm43xx: Radio turned on
[ 133.027000] bcm43xx: Radio enabled by hardware
[ 133.214000] bcm43xx: Chip initialized
[ 133.214000] bcm43xx: 32-bit DMA initialized
[ 133.214000] bcm43xx: Keys cleared
[ 133.214000] bcm43xx: Selected 802.11 core (phytype 2)
[ 134.227000] bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt
= 0
[ 134.227000] bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt
= 0
[ 134.227000] bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt
= 0
[ 134.227000] bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt
= 0
eth1 Scan completed :
Cell 01 - Address: 00:12:17:B0:7D:8E
ESSID:"Norman'sNetwork"
Protocol:IEEE 802.11bg
Mode:Master
Channel:6
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality=100/100 Signal level=-68 dBm Noise level=-69 dBm
Extra: Last beacon: 70ms ago
Cell 02 - Address: 00:11:50:A2:14:36
ESSID:"Neonet"
Protocol:IEEE 802.11bg
Mode:Master
Channel:3
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality=100/100 Signal level=-58 dBm Noise level=-69 dBm
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
Extra: Last beacon: 138ms ago
Cell 03 - Address: 00:18:39:65:19:7C
ESSID:"linksys"
Protocol:IEEE 802.11bg
Mode:Master
Channel:6
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality=100/100 Signal level=-74 dBm Noise level=-69 dBm
Extra: Last beacon: 30ms ago
Cell 04 - Address: 00:03:93:EA:91:C9
ESSID:"dreamland"
Protocol:IEEE 802.11g
Mode:Master
Channel:11
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality=100/100 Signal level=-77 dBm Noise level=-69 dBm
Extra: Last beacon: 2796ms ago
Cell 05 - Address: 00:14:BF:2B:A1:EF
ESSID:"linksys"
Protocol:IEEE 802.11bg
Mode:Master
Channel:6
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality=100/100 Signal level=-74 dBm Noise level=-69 dBm
Extra: Last beacon: 61ms ago
Cell 06 - Address: 00:18:39:E4:3B:45
ESSID:"Elroy"
Protocol:IEEE 802.11bg
Mode:Master
Channel:6
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality=100/100 Signal level=-81 dBm Noise level=-69 dBm
Extra: Last beacon: 254ms ago
Cell 07 - Address: 00:0F:66:B2:0E:2E
ESSID:"<hidden>"
Protocol:IEEE 802.11bg
Mode:Master
Channel:6
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality=100/100 Signal level=-84 dBm Noise level=-69 dBm
Extra: Last beacon: 267ms ago
Cell 08 - Address: 00:13:10:0E:DA:13
ESSID:"scubear"
Protocol:IEEE 802.11bg
Mode:Master
Channel:6
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality=100/100 Signal level=-83 dBm Noise level=-69 dBm
Extra: Last beacon: 1800ms ago
_______________________________________________
Bcm43xx-dev mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
