Ryan Hurley wrote: > *Larry Finger* wrote: > > If you do an 'iwlist s', what do you see? It seems that you have > debugging turned on in SoftMAC, but > I see no indication that anything attempted to scan. > > > The output from iwlist -s is attached, as is the complete dmesg log. > Scanning works fine (actually better than when I'm using ndiswrapper or > windows) but nothing connects. > > If you need anything else just ask. > -Ryan Hurley > > > > ------------------------------------------------------------------------ > > eth1 Scan completed : > Cell 01 - Address: 00:12:17:B0:7D:8E > ESSID:"Norman'sNetwork" > Protocol:IEEE 802.11bg > Mode:Master > Channel:6 > Encryption key:off > Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s > 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s > 48 Mb/s; 54 Mb/s > Quality=100/100 Signal level=-68 dBm Noise level=-69 dBm > Extra: Last beacon: 70ms ago > Cell 02 - Address: 00:11:50:A2:14:36 > ESSID:"Neonet" > Protocol:IEEE 802.11bg > Mode:Master > Channel:3 > Encryption key:on > Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s > 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s > 48 Mb/s; 54 Mb/s > Quality=100/100 Signal level=-58 dBm Noise level=-69 dBm
This is the strongest signal in your scan list. With the minimal TX signal strength in the current version for 4311's, I doubt that you would be able to authenticate. Larry _______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
