-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Larry Finger escribió:
> Fernando Toledo wrote:
>> i can scan
>> i see the ap associated:
>>
>> eth1 IEEE 802.11b/g ESSID:"prosistem" Nickname:"Broadcom 4311"
>> Mode:Managed Frequency=2.437 GHz Access Point:
>> 00:0E:2E:64:77:FD
>> Bit Rate=1 Mb/s Tx-Power=18 dBm
>> RTS thr:off Fragment thr:off
>> Encryption key:off
>> Link Quality=111/100 Signal level=-29 dBm Noise level=-69 dBm
>
> With this signal/noise, you should be able to associate and authenticate.
>
yeap the ap is near to me.
>> Rx invalid nwid:0 Rx invalid crypt:344 Rx invalid frag:0
>> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>>
>> but don't connect,
>> i see that the bit rate is 1Mb , i can't change it
>> ntbkragnarok:~# iwconfig eth1 rate 11
>> Error for wireless request "Set Bit Rate" (8B20) :
>> SET failed on device eth1 ; Invalid argument.
>
> The syntax is 'iwconfig eth1 rate 11M'.
sorry , typo error, but it do not change the rate, iwconfig still show 1M
>
> Please send the output of 'iwlist s', 'iwconfig', and 'ifconfig'. Do other
> machines and/or OS's
> connect to this AP? Have you tried a different channel?
>
- ---------------------------------
ntbkragnarok:~# iwconfig eth1
eth1 IEEE 802.11b/g ESSID:"prosistem" Nickname:"ragnarok"
Mode:Managed Frequency=2.437 GHz Access Point:
00:0E:2E:64:77:FD
Bit Rate=1 Mb/s Tx-Power=18 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Link Quality=100/100 Signal level=-33 dBm Noise level=-68 dBm
Rx invalid nwid:0 Rx invalid crypt:4224 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
- --------------------------------
ntbkragnarok:~# iwlist eth1 s
eth1 Scan completed :
Cell 01 - Address: 00:40:F4:E0:FE:17
ESSID:"Andesur"
Protocol:IEEE 802.11bg
Mode:Master
Channel:6
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality=100/100 Signal level=-68 dBm Noise
level=-70 dBm
Extra: Last beacon: 236ms ago
Cell 02 - Address: 00:0E:2E:64:77:FD
ESSID:"prosistem"
Protocol:IEEE 802.11b
Mode:Master
Channel:6
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
Quality=100/100 Signal level=-29 dBm Noise
level=-70 dBm
Extra: Last beacon: 252ms ago
Cell 03 - Address: 00:0D:88:3D:04:93
ESSID:"MAIZ"
Protocol:IEEE 802.11b
Mode:Master
Channel:6
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
Quality=100/100 Signal level=-77 dBm Noise
level=-70 dBm
Extra: Last beacon: 1916ms ago
> Larry
>
>
i connect to prosistem essid
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Queueing Authentication Request to 00:0e:2e:64:77:fd
SoftMAC: Cannot associate without being authenticated, requested
authentication
SoftMAC: Sent Authentication Request to 00:0e:2e:64:77:fd.
SoftMAC: Open Authentication completed with 00:0e:2e:64:77:fd
SoftMAC: sent association request!
SoftMAC: associated!
bcm43xx: Radio turned off
bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64
bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0220 (TX) max used slots: 4/512
bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512
bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27)
bcm43xx: Radio turned on
bcm43xx: Radio enabled by hardware
bcm43xx: Chip initialized
bcm43xx: 32-bit DMA initialized
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
- ------------------------------------------
ntbkragnarok:~# dhclient eth1
Internet Software Consortium DHCP Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.
Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html
Listening on LPF/eth1/00:14:a5:f5:85:ed
Sending on LPF/eth1/00:14:a5:f5:85:ed
Sending on Socket/fallback/fallback-net
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 7
receive_packet failed on eth1: Network is down
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 14
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 14
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 10
No DHCPOFFERS received.
No working leases in persistent database.
Sleeping.
ntbkragnarok:~#
the "Network is down" message in dhcp client seem to be bad, is see that
the led in blink upon dhcp client statarted, maybe , here the interface
down and up. teh dhcp client is from debian testing.
i connect to this ap with my realtek pcmcia without problems in this
machine, also i have 3 laptops more connected too.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFFq7wcz8H9Vs7bTsMRAh/wAJ94OKRh9rm/8CXLZWALgglpaSOXLgCfUjAW
dfpLNg/AbLFWxBEUbO0WJmw=
=h5yx
-----END PGP SIGNATURE-----
_______________________________________________
Bcm43xx-dev mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
