> One thing I forgot is that the LED will be on only if the switch is in the on > position _AND_ the > interface is UP.
Yes I figured that out. (eventually) > >>> dhcpcd eth1 <-low transmit power??? > >> Most likely. How far are you from the AP? > > > > This is a timeout issue. I tried to apply the timeout patch which I > > assume is for this and it didn't take. I have logs for both patch > > applications below. To the distance issue my ap died so I am trying to > > just connect to one next door. (with permission) The distance is about > > 50ft. So this could be the main factor. This is why I said it might be > > my fault. The thing is I can connect to it in windows most of the time > > so I know it is in range. I will be going to school on Tuesday and > > will report back then. They have a much better AP. > > With the current transmit levels of the 4311, 50 feet through at least one > wall is probably too much. I have tried 3 more AP at much closer distances <9ft and <4ft and it still won't work. I ether get "Network Down" or a timeout. > > Presario1600 bcm43xx # patch -p0 <patch_2.6.18.1_signal_quality ... > > Presario1600 bcm43xx # patch -p0 <patch_2.6.18.1_watchdog_timeout2 ... > Those patches are already applied to your code. Thanks for the clarification, and assistance. -- http://www.coe.neu.edu/~efoss/ http://evanfoss.googlepages.com/ _______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
