Just tried out the the new pci-e patch. And it works like a charm for me!
Thanks guys. here are some scan results, and data:
I am sitting one room away from the AP. about 8 meters (counted as steps).
Works with 11M aswell but 1M goes faster, as you already know.
Also I get more scanning results (about 6 APs) when not connected to the AP,
but when connected to the AP I get 2 APs.
If you guys need more info let me know.
regards
Yildirim Zaynal
[EMAIL PROTECTED]:1 > uname
-a
/home/jinn/
Linux Estergon 2.6.20-rc5-ARCH #2 SMP PREEMPT Tue Jan 16 13:20:35 CET 2007
i686 Genuine Intel(R) CPU T2500 @ 2.00GHz GenuineIntel GNU/Linux
[EMAIL PROTECTED]:0 >
iwconfig after getting ip from ap:
eth1 IEEE 802.11b/g ESSID:"Atilla" Nickname:"Atilla"
Mode:Managed Frequency=2.412 GHz Access Point: 00:14:7F:72:11:25
Bit Rate=1 Mb/s Tx-Power=18 dBm
RTS thr:off Fragment thr:off
Link Quality=60/100 Signal level=-74 dBm Noise level=-65 dBm
Rx invalid nwid:0 Rx invalid crypt:12 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
----------------------
lspci
----------------------
[EMAIL PROTECTED]:0 >
lspci
/home/jinn/
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT
Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT
Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
2 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
3 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1
(rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2
(rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3
(rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4
(rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge
(rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial
ATA Storage Controller IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev
01)
01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 110M /
GeForce Go 7300 (rev a1)
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit
Ethernet PCI Express (rev 02)
0c:00.0 Network controller: Broadcom Corporation BCM4310 UART (rev 01)
------------------------
lspci -n
------------------------
[EMAIL PROTECTED]:1 > lspci
-n
/home/jinn/
00:00.0 0600: 8086:27a0 (rev 03)
00:01.0 0604: 8086:27a1 (rev 03)
00:1b.0 0403: 8086:27d8 (rev 01)
00:1c.0 0604: 8086:27d0 (rev 01)
00:1c.1 0604: 8086:27d2 (rev 01)
00:1c.2 0604: 8086:27d4 (rev 01)
00:1d.0 0c03: 8086:27c8 (rev 01)
00:1d.1 0c03: 8086:27c9 (rev 01)
00:1d.2 0c03: 8086:27ca (rev 01)
00:1d.3 0c03: 8086:27cb (rev 01)
00:1d.7 0c03: 8086:27cc (rev 01)
00:1e.0 0604: 8086:2448 (rev e1)
00:1f.0 0601: 8086:27b9 (rev 01)
00:1f.2 0101: 8086:27c4 (rev 01)
00:1f.3 0c05: 8086:27da (rev 01)
01:00.0 0300: 10de:01d7 (rev a1)
09:00.0 0200: 14e4:1600 (rev 02)
0c:00.0 0280: 14e4:4312 (rev 01)
[EMAIL PROTECTED]:0 >
----------------------
SCANNING
----------------------
[EMAIL PROTECTED]:0 > iwlist eth1
scan
/home/jinn/
eth1 Scan completed :
Cell 01 - Address: 00:14:7F:72:11:25
ESSID:"Atilla"
Protocol:IEEE 802.11bg
Mode:Master
Channel:1
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality=89/100 Signal level=-66 dBm Noise level=-72
dBm
Extra: Last beacon: 92ms ago
Cell 02 - Address: 00:40:96:27:DD:FB
ESSID:"<hidden>"
Protocol:IEEE 802.11b
Mode:Master
Channel:1
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
Quality=75/100 Signal level=-85 dBm Noise level=-72
dBm
Extra: Last beacon: 8412ms ago
-------------------------------------------------------------------------
DMESG, LAST PAGE
-------------------------------------------------------------------------
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1076308k swap on /dev/sda5. Priority:-1 extents:1 across:1076308k
usb 1-2.3.2: new full speed USB device using uhci_hcd and address 9
usb 1-2.3.2: configuration #1 chosen from 1 choice
PM: Writing back config space on device 0000:09:00.0 at offset c (was
90020000, writing 0)
**WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 1:00.0] forgot to
specify physical device; fix it!
**WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 1:00.0] forgot to
specify physical device; fix it!
**WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 1:00.0] forgot to
specify physical device; fix it!
ndiswrapper: device wlan0 removed
ACPI: PCI interrupt for device 0000:0c:00.0 disabled
usbcore: deregistering interface driver ndiswrapper
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <
[EMAIL PROTECTED]>
bcm43xx driver
ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:0c:00.0 to 64
ndiswrapper version 1.34 loaded (preempt=yes,smp=yes)
usbcore: registered new interface driver ndiswrapper
ieee80211_crypt: registered algorithm 'WEP'
printk: 1 messages suppressed.
SoftMAC: Shared Key Authentication completed with 00:14:7f:72:11:25
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
eth1: no IPv6 routers present
[EMAIL PROTECTED]:0
----------------------------------------------------------------------------------------------
_______________________________________________
Bcm43xx-dev mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
