On Thursday 02 August 2007, Larry Finger wrote:
> Michael,
>
> I couldn't find any long/short indication in the header, so I added a bool
> that
> is set when the frame is sent.
This is not going to work.
But we can do this differently.
You can do something like:
if (!status->acked && !tx_control->noack)
excessive_retries = 1;
So we don't need to care about the retry count.
Anyway. I don't know why we need excessive_retries _at_ _all_.
The rc algorithm does already know if the frame succeed or failed
anyway.
/me shrugs
> Larry
> ---
>
> In bcm43xx-mac80211, the mechanism for decreasing the transmit rate cannot
> be triggered. This may be shown by walking away from the AP with a laptop.
> At some distance, communications will be lost and never recovered because
> the rate decreasing mechanism of rc80211_simple needs to see excessive_retries
> set in the ieee80211_tx_status struct. With this patch, the transmit rate
> will decrease until communications restart.
>
> Signed-off-by: Larry Finger <[EMAIL PROTECTED]>
> ---
>
> Index: wireless-dev/drivers/net/wireless/bcm43xx-mac80211/bcm43xx_dma.c
> ===================================================================
> --- wireless-dev.orig/drivers/net/wireless/bcm43xx-mac80211/bcm43xx_dma.c
> +++ wireless-dev/drivers/net/wireless/bcm43xx-mac80211/bcm43xx_dma.c
> @@ -1311,6 +1311,16 @@ void bcm43xx_dma_handle_txstatus(struct
> */
> if (status->acked)
> meta->txstat.flags |= IEEE80211_TX_STATUS_ACK;
> + else
> + if (dev->last_frame_long) {
> + if (status->frame_count >=
> + dev->long_retry_limit)
> + meta->txstat.excessive_retries
> = 1;
> + } else {
> + if (status->frame_count >=
> + dev->short_retry_limit)
> + meta->txstat.excessive_retries
> = 1;
> + }
> meta->txstat.retry_count = status->frame_count - 1;
> ieee80211_tx_status_irqsafe(dev->wl->hw, meta->skb,
> &(meta->txstat));
> /* skb is freed by ieee80211_tx_status_irqsafe() */
> Index: wireless-dev/drivers/net/wireless/bcm43xx-mac80211/bcm43xx.h
> ===================================================================
> --- wireless-dev.orig/drivers/net/wireless/bcm43xx-mac80211/bcm43xx.h
> +++ wireless-dev/drivers/net/wireless/bcm43xx-mac80211/bcm43xx.h
> @@ -707,6 +707,9 @@ struct bcm43xx_wldev {
> bool short_preamble; /* TRUE, if short preamble is enabled.
> */
> bool short_slot; /* TRUE, if short slot timing is
> enabled. */
> bool radio_hw_enable; /* saved state of radio hardware
> enabled state */
> + bool last_frame_long; /* true is last frame was long */
> + u8 short_retry_limit;
> + u8 long_retry_limit;
>
> /* PHY/Radio device. */
> struct bcm43xx_phy phy;
> Index: wireless-dev/drivers/net/wireless/bcm43xx-mac80211/bcm43xx_main.c
> ===================================================================
> --- wireless-dev.orig/drivers/net/wireless/bcm43xx-mac80211/bcm43xx_main.c
> +++ wireless-dev/drivers/net/wireless/bcm43xx-mac80211/bcm43xx_main.c
> @@ -3333,10 +3333,12 @@ static int bcm43xx_wireless_core_init(st
> tmp = limit_value(modparam_short_retry, 0, 0xF);
> bcm43xx_shm_write16(dev, BCM43xx_SHM_SCRATCH,
> BCM43xx_SHM_SC_SRLIMIT, tmp);
> + dev->short_retry_limit = tmp;
> tmp = limit_value(modparam_long_retry, 0, 0xF);
> bcm43xx_shm_write16(dev, BCM43xx_SHM_SCRATCH,
> BCM43xx_SHM_SC_LRLIMIT, tmp);
>
> + dev->long_retry_limit = tmp;
> bcm43xx_shm_write16(dev, BCM43xx_SHM_SHARED,
> BCM43xx_SHM_SH_SFFBLIM, 3);
> bcm43xx_shm_write16(dev, BCM43xx_SHM_SHARED,
> Index: wireless-dev/drivers/net/wireless/bcm43xx-mac80211/bcm43xx_xmit.c
> ===================================================================
> --- wireless-dev.orig/drivers/net/wireless/bcm43xx-mac80211/bcm43xx_xmit.c
> +++ wireless-dev/drivers/net/wireless/bcm43xx-mac80211/bcm43xx_xmit.c
> @@ -264,6 +264,7 @@ static void generate_txhdr_fw4(struct bc
> * is a 5Ghz packet.
> */
> txhdr->chan_radio_code = phy->channel;
> + dev->last_frame_long = 0;
>
> /* PHY TX Control word */
> if (rate_ofdm)
> @@ -336,6 +337,7 @@ static void generate_txhdr_fw4(struct bc
> if (rts_rate_fb_ofdm)
> extra_ft |= BCM43xx_TX4_EFT_RTSFBOFDM;
> mac_ctl |= BCM43xx_TX4_MAC_LONGFRAME;
> + dev->last_frame_long = 1;
> }
>
> /* Magic cookie */
>
>
_______________________________________________
Bcm43xx-dev mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
