Please keep in the mailing list no Private conversations. Made some responces bellow.
On 9/8/07, Guillermo Javier Nardoni <[EMAIL PROTECTED]> wrote: > > > -----Mensaje original----- > > De: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] En nombre de > > Brennan Ashton > > Enviado el: Domingo, 26 de Agosto de 2007 08:02 p.m. > > Para: [EMAIL PROTECTED] > > CC: [email protected] > > Asunto: Re: BCM4306 totally exausted > > > > On 8/26/07, Guillermo Javier Nardoni <[EMAIL PROTECTED]> wrote: > > > Hi everyone, this is my first time here so i'll give a > > brief introducing.. > > > My name is Guillermo and i'm from Argentina, i am in a > > wireless team > > > group building wifi comunnities but... A few days ago we bought > > > 2 linksys wrt54gl v1.1 s/N: CL7B... Wich means it is a broadcom > > > chipset > > > based.- > > > Well, we want to put openwrt with 2.6 kernel but it is doesn't have > > > wireless support yet due to Broadcom. > > > So, i have searched and readed and watch some tv show too but it is > > > still doesn't work. > > > Does anybody tried to compile the driver with linux 2.6 > > vanilla kernel > > > and work properlly? > > > De wrt54gl chipset revision is 02 > > > > Could you post the result of > > > > uname -r > 2.6.22 > > > ispci | grep Broadcom > Don't work, i've installed the package from openwrt > But it shows nothing.... (empty output when i type "lspci -v") that is lspci with an L not an i, it is a core PCI util so you should have it, if nothing shows up it would have to be on a different buss? > > > dmesg | grep bcm > When i type dmesg | grep bcm (nothing greped) > So i copied this... > > [EMAIL PROTECTED]:/lib/modules/2.6.22# clear > [EMAIL PROTECTED]:/lib/modules/2.6.22# insmod bcm43xx-mac80211.ko; dmesg > Linux version 2.6.22 ([EMAIL PROTECTED]) (gcc version 4.1.2) #3 Thu Jul 26 > 18:00:50 > CEST 2007 > CPU revision is: 00029008 > ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0E, vendor 0x4243) > ssb: Core 1 found: Fast Ethernet (cc 0x806, rev 0x09, vendor 0x4243) > ssb: Core 2 found: MIPS 3302 (cc 0x816, rev 0x06, vendor 0x4243) > ssb: Core 3 found: USB 1.1 Host (cc 0x817, rev 0x02, vendor 0x4243) > ssb: Core 4 found: MEMC SDRAM (cc 0x80F, rev 0x01, vendor 0x4243) > ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243) > ssb: Core 6 found: Roboswitch (cc 0x81C, rev 0x02, vendor 0x4243) > ssb: Initializing MIPS core... > ssb: set_irq: core 0x0806, irq 2 => 2 > ssb: set_irq: core 0x0817, irq 3 => 3 > ssb: set_irq: core 0x0812, irq 4 => 4 > ssb: Sonics Silicon Backplane found at address 0x18000000 > Determined physical RAM map: > memory: 01000000 @ 00000000 (usable) > Initrd not found or empty - disabling initrd > On node 0 totalpages: 4096 > Normal zone: 32 pages used for memmap > Normal zone: 0 pages reserved > Normal zone: 4064 pages, LIFO batch:0 > Built 1 zonelists. Total pages: 4064 > Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 > init=/etc/preinit noinitrd console=ttyS0,115200 > Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes. > Primary data cache 8kB, 2-way, linesize 16 bytes. > Synthesized TLB refill handler (20 instructions). > Synthesized TLB load handler fastpath (32 instructions). > Synthesized TLB store handler fastpath (31 instructions). > Synthesized TLB modify handler fastpath (30 instructions). > PID hash table entries: 64 (order: 6, 256 bytes) > Using 100.000 MHz high precision timer. > Dentry cache hash table entries: 2048 (order: 1, 8192 bytes) > Inode-cache hash table entries: 1024 (order: 0, 4096 bytes) > Memory: 13628k/16384k available (2030k kernel code, 2756k reserved, 297k > data, 120k init, 0k highmem) > Calibrating delay loop... 199.16 BogoMIPS (lpj=398336) > Mount-cache hash table entries: 512 > NET: Registered protocol family 16 > Time: MIPS clocksource has been installed. > NET: Registered protocol family 2 > IP route cache hash table entries: 1024 (order: 0, 4096 bytes) > TCP established hash table entries: 512 (order: 0, 4096 bytes) > TCP bind hash table entries: 512 (order: -1, 2048 bytes) > TCP: Hash tables configured (established 512 bind 512) > TCP reno registered > squashfs: version 3.0 (2006/03/15) Phillip Lougher > Registering mini_fo version $Id$ > JFFS2 version 2.2. (NAND) C 2001-2006 Red Hat, Inc. > io scheduler noop registered > io scheduler deadline registered (default) > Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled > serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A > serial8250: ttyS1 at MMIO 0x0 (irq = 3) is a 16550A > b44.c:v1.01 (Jun 16, 2006) > eth0: Broadcom 10/100BaseT Ethernet 00:1a:70:6a:d8:c8 > flash init: 0x1c000000 0x02000000 > Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank > Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 > Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 > Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 > Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 > Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 > Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 > Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 > Amd/Fujitsu Extended Query Table at 0x0040 > Newer Samsung flash detected, should be compatibile with Amd/Fujitsu. > number of CFI chips: 1 > cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. > Flash device: 0x400000 at 0x1fc00000 > bootloader size: 262144 > Creating 4 MTD partitions on "Physically mapped flash": > 0x00000000-0x00040000 : "cfe" > 0x00040000-0x003f0000 : "linux" > 0x000f8000-0x003f0000 : "rootfs" > mtd: partition "rootfs" doesn't start on an erase block boundary -- force > read-only > 0x00200000-0x003f0000 : "rootfs_data" > 0x003f0000-0x00400000 : "nvram" > nf_conntrack version 0.5.0 (128 buckets, 1024 max) > ip_tables: (C) 2000-2006 Netfilter Core Team > TCP vegas registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > 802.1Q VLAN Support v1.8 Ben Greear <[EMAIL PROTECTED]> > All bugs added by David S. Miller <[EMAIL PROTECTED]> > VFS: Mounted root (squashfs filesystem) readonly. > Freeing unused kernel memory: 120k freed > Warning: unable to open an initial console. > Algorithmics/MIPS FPU Emulator v1.5 > diag: Detected 'Linksys WRT54G/GS/GL' > b44: eth0: Link is up at 100 Mbps, full duplex. > b44: eth0: Flow control is off for TX and off for RX. > Probing device eth0: found! > mini_fo: using base directory: / > mini_fo: using storage directory: /jffs > b44: eth0: Link is up at 100 Mbps, full duplex. > b44: eth0: Flow control is off for TX and off for RX. > BFL_ENETADM not set in boardflags. Use force=1 to ignore. > PPP generic driver version 2.4.2 > wlan: 0.8.4.2 (svn r2568) > device eth0.0 entered promiscuous mode > eth0.0: dev_set_promiscuity(master, 1) > device eth0 entered promiscuous mode > eth0.0: add 01:00:5e:00:00:01 mcast address to master interface > br-lan: port 1(eth0.0) entering learning state > br-lan: topology change detected, propagating > br-lan: port 1(eth0.0) entering forwarding state > ath_hal: module license 'Proprietary' taints kernel. > ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, > RF5413, RF2133, REGOPS_FUNC) > ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (svn r2568) > ath_rate_minstrel: look around rate set to 10% > ath_rate_minstrel: EWMA rolloff level set to 75% > ath_rate_minstrel: max segment size in the mrr set to 6000 us > wlan: mac acl policy registered > ath_pci: 0.9.4.5 (svn r2568) > eth0.1: add 01:00:5e:00:00:01 mcast address to master interface > eth0.0: received packet with own address as source address > eth0.0: received packet with own address as source address > bcm43xx_mac80211: Broadcom 5352 WLAN found > bcm43xx_mac80211: Found PHY: Analog 2, Type 2, Revision 7 > bcm43xx_mac80211: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2 > bcm43xx_mac80211: Radio turned off Why is the radio off? > wmaster0: Selected rate control algorithm 'simple' > wmaster0: Failed to initialize wep > bcm43xx_mac80211: probe of ssb0:3 failed with error -12 > > > > have you used fwcutter yet, if so what version > > > > I believe for that revision you have to use b43-legacy or > > bcm43xx depending on your kernel version, however i have been > > out of town during most of the naming changes and am just catching up. > > > > -- > > Brennan Ashton > > Bellingham, Washington > > > > "The box said, 'Requires Windows 98 or better'. So I installed Linux" > > _______________________________________________ > > Bcm43xx-dev mailing list > > [email protected] > > https://lists.berlios.de/mailman/listinfo/bcm43xx-dev > > > > -- Brennan Ashton Bellingham, Washington "The box said, 'Requires Windows XP or better'. So I installed Linux" _______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
