Michael Buesch wrote:
>
> There is no such thing as "connected".
> The bit is called "gmode". Why do you change it back to the wrong name?
> The V3 specs are simply _wrong_. It has nothing to do with the backplane
> or anything else like that. The bit just selects between the A-PHY and
> the BG-PHY. Of course, if there is no A-PHY it will obviously machine-check
> on access, if it's selected.
>
> V3 specs assume that the meaning is "connected", because it was misinterpreted
> to be a "PHY connect" flag. But it really is a "PHY select" flag, to select
> between two different PHYs. If it's enabled, the G-PHY will be selected (and
> the A-PHY otherwise).
>
> Btw, while we are at it: The V3 specs are wrong regarding the gmode (or
> connected)
> bit in other areas as well, because there was even more confusion with
> other PHY flags. The PHY specification is pretty broken in the v3 specs.
The critical part of the legacy code in this regard is from phy_calibrate():
if (phy->type == B43legacy_PHYTYPE_G && phy->rev == 1) {
b43legacy_wireless_core_reset(dev, 0);
b43legacy_phy_initg(dev);
b43legacy_wireless_core_reset(dev, B43legacy_TMSLOW_GMODE);
}
If phy_initg is going to work correctly, then gmode has to follow the state of
the MACCTL_GMODE bit
in MMIO_MACCTL. Apparently GPHYs with rev > 1 do not care about this bit, but
the BCM4306/2 does.
The changes can be accomplished by the following patch:
Index: wireless-dev/drivers/net/wireless/b43legacy/main.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/b43legacy/main.c
+++ wireless-dev/drivers/net/wireless/b43legacy/main.c
@@ -738,8 +738,11 @@ void b43legacy_wireless_core_reset(struc
macctl = b43legacy_read32(dev, B43legacy_MMIO_MACCTL);
macctl &= ~B43legacy_MACCTL_GMODE;
- if (flags & B43legacy_TMSLOW_GMODE)
+ if (flags & B43legacy_TMSLOW_GMODE) {
macctl |= B43legacy_MACCTL_GMODE;
+ dev->phy.gmode = 1;
+ } else
+ dev->phy.gmode = 0;
macctl |= B43legacy_MACCTL_IHR_ENABLED;
b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl);
}
The above patch and a revised comment for the gmode variable will be the
contents of V3 of my patch.
I hope that you find it acceptable. In my position as maintainer, I can push
stuff through, but I
prefer that you are in agreement.
Larry
_______________________________________________
Bcm43xx-dev mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
