On Sunday 10 February 2008 04:22:06 Pedro P wrote: > > Hi, > > My name is Javier and I'm a new in Linux. I have a problem with my wireless > card Broadcom > (WL-138G V2). The firmware is installed but I can't connect card. Also > NetworkManager > doesn't detect wireless card. > Can You help me? > Regards, > Javier > > Specifications of my system: (lsmod and dmesg) > --------------------------------------------------------------------------------------------------------- > [EMAIL PROTECTED]:~> lsmod > Module Size Used by > nls_iso8859_1 8192 1 > nls_cp437 9856 1 > vfat 16128 1 > fat 52380 1 vfat > iptable_filter 6912 0 > ip_tables 16324 1 iptable_filter > ip6table_filter 6784 0 > ip6_tables 17476 1 ip6table_filter > x_tables 18308 2 ip_tables,ip6_tables > arc4 6016 2 > ipv6 268152 20 > ecb 7552 2 > blkcipher 10116 1 ecb > ieee80211_crypt_wep 9088 1 > af_packet 29064 4 > cpufreq_conservative 11272 0 > snd_pcm_oss 50432 0 > snd_mixer_oss 20096 1 snd_pcm_oss > cpufreq_userspace 8704 0 > snd_seq 54452 0 > snd_seq_device 12172 1 snd_seq > cpufreq_powersave 5888 0 > acpi_cpufreq 13192 0 > speedstep_lib 9220 0 > microcode 15372 0 > apparmor 40736 0 > loop 21636 0 > dm_mod 56880 0 > iTCO_wdt 14372 0 > intel_agp 27156 0 > i2c_i801 12560 0 > iTCO_vendor_support 7812 1 iTCO_wdt > usb_storage 80780 1 > parport_pc 40764 0 > agpgart 35764 1 intel_agp > parport 37832 1 parport_pc > cdc_ether 9984 0 > bcm43xx 419548 0 > firmware_class 13568 2 microcode,bcm43xx > i2c_core 27520 1 i2c_i801 > rtc_cmos 12064 0 > snd_hda_intel 272796 1 > snd_pcm 82564 2 snd_pcm_oss,snd_hda_intel > snd_timer 26756 2 snd_seq,snd_pcm > snd 58164 9 > snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer > soundcore 11460 1 snd > snd_page_alloc 13960 2 snd_hda_intel,snd_pcm > usbnet 21768 1 cdc_ether > rtc_core 23048 1 rtc_cmos > sr_mod 19492 0 > rtc_lib 7040 1 rtc_core > cdrom 37020 1 sr_mod > ieee80211softmac 34432 1 bcm43xx > button 12432 0 > ieee80211 35400 2 bcm43xx,ieee80211softmac > ieee80211_crypt 9728 2 ieee80211_crypt_wep,ieee80211 > ide_core 122948 1 usb_storage > atl1 35980 0 > mii 9344 2 usbnet,atl1 > sg 37036 0 > sd_mod 31104 5 > ehci_hcd 34956 0 > uhci_hcd 27024 0 > usbcore 123372 6 usb_storage,cdc_ether,usbnet,ehci_hcd,uhci_hcd > edd 12996 0 > ext3 131848 1 > mbcache 12292 1 ext3 > jbd 68148 1 ext3 > fan 9220 0 > ata_piix 21380 2 > libata 136776 1 ata_piix > scsi_mod 140376 5 usb_storage,sr_mod,sg,sd_mod,libata > thermal 19848 0 > processor 40744 2 acpi_cpufreq,thermal > ---------------------------------------------------------------------------------------------------- > [EMAIL PROTECTED]:~> dmesg > > > bcm43xx: Number of cores: 4 > bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243 > bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243 > bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243 > bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243 > bcm43xx: PHY connected > eth1: register 'cdc_ether' at usb-0000:00:1d.1-1, CDC Ethernet Device, > 00:11:e3:b3:50:7a > usbcore: registered new interface driver cdc_ether > bcm43xx: Detected PHY: Analog: 3, Type 2, Revision 7 > bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8) > bcm43xx: Radio turned off > bcm43xx: Radio turned off > Linux agpgart interface v0.102 (c) Dave Jones > parport_pc 00:06: reported by Plug and Play ACPI > parport0: PC-style at 0x378 (0x778), irq 7, dma 3 > [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] > Initializing USB Mass Storage driver... > scsi4 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 4 > usb-storage: waiting for device to settle before scanning > iTCO_vendor_support: vendor-support=0 > scsi5 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 2 > usb-storage: waiting for device to settle before scanning > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 > iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) > iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) > iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > Adding 6080560k swap on /dev/sda5. Priority:-1 extents:1 across:6080560k > device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] > loop: module loaded > scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 > CCS > sd 4:0:0:0: [sdb] Attached SCSI removable disk > sd 4:0:0:0: Attached scsi generic sg2 type 0 > scsi 5:0:0:0: Direct-Access USB 2.0 Flash Disk 2.00 PQ: 0 ANSI: 2 > sd 5:0:0:0: [sdc] Attached SCSI removable disk > sd 5:0:0:0: Attached scsi generic sg3 type 0 > usb-storage: device scan complete > scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 > CCS > sd 4:0:0:1: [sdd] Attached SCSI removable disk > sd 4:0:0:1: Attached scsi generic sg4 type 0 > scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 > CCS > sd 4:0:0:2: [sde] Attached SCSI removable disk > sd 4:0:0:2: Attached scsi generic sg5 type 0 > scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 > CCS > sd 4:0:0:3: [sdf] Attached SCSI removable disk > sd 4:0:0:3: Attached scsi generic sg6 type 0 > usb-storage: device scan complete > AppArmor: AppArmor initialized > audit(1202607837.980:2): type=1505 info="AppArmor initialized" pid=2241 > IA-32 Microcode Update Driver: v1.14a <[EMAIL PROTECTED]> > powernow: This module only works with AMD K7 CPUs > processor_perflib-0519 [00] processor_get_psd : Invalid _PSD data > processor_perflib-0519 [00] processor_get_psd : Invalid _PSD data > processor_perflib-0519 [00] processor_get_psd : Invalid _PSD data > processor_perflib-0519 [00] processor_get_psd : Invalid _PSD data > NET: Registered protocol family 17 > bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 > ieee80211_crypt: registered algorithm 'WEP' > NET: Registered protocol family 10 > bcm43xx: set security called, .active_key = 0, .level = 1, .enabled = 1, > .encrypt = 1, > auth_mode = 0 > lo: Disabled Privacy Extensions > Mobile IPv6 > SoftMAC: Associate: Scanning for networks first. > SoftMAC: Associate: failed to initiate scan. Is device up? > bcm43xx: PHY connected > ip6_tables: (C) 2000-2006 Netfilter Core Team > bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) > bcm43xx: Radio turned on > bcm43xx: Radio enabled by hardware > bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: > drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1489:bcm43xx_find_lopair() > bcm43xx: WARNING: Writing invalid LOpair (low: -33, high: 0, index: 109) > [<f978c9ef>] bcm43xx_phy_lo_adjust+0x1eb/0x20f [bcm43xx] > [<f978df8b>] bcm43xx_phy_initb6+0x4f8/0x637 [bcm43xx] > [<f978e16d>] bcm43xx_phy_initg+0xa3/0xd73 [bcm43xx] > [<f97860eb>] bcm43xx_radio_selectchannel+0x451/0x45d [bcm43xx] > [<f97927a7>] bcm43xx_leds_update+0x3d1/0x3f2 [bcm43xx] > [<f97903d4>] bcm43xx_phy_init+0x5df/0x5fd [bcm43xx] > [<f9780ff0>] bcm43xx_chip_init+0x7a6/0xa7b [bcm43xx] > [<f9782647>] wireless_core_up+0x181/0x627 [bcm43xx] > [<f977fdfc>] bcm43xx_switch_core+0x27/0x38 [bcm43xx] > [<f97906a5>] bcm43xx_pctl_set_clock+0xda/0x116 [bcm43xx] > [<c011f2fc>] __cond_resched+0x18/0x29 > [<f9782e5c>] bcm43xx_select_wireless_core+0x36f/0x4d4 [bcm43xx] > [<f9790ca1>] bcm43xx_pctl_init+0xf0/0x12f [bcm43xx] > [<c01d06b0>] __delay+0x6/0x7 > [<f97830ba>] bcm43xx_init_board+0x47/0x120 [bcm43xx] > [<c015f56a>] __handle_mm_fault+0x3ea/0xa83 > [<c02c53b6>] _spin_lock_bh+0x8/0x18 > [<c02706a3>] dev_open+0x2e/0x68 > [<c026f0ea>] dev_change_flags+0x4c/0xfa > [<c02ab6cd>] devinet_ioctl+0x24c/0x551 > [<c02702f2>] dev_ifsioc+0x113/0x3aa > [<c01d0e83>] copy_to_user+0x25/0x3a > [<c0265907>] sock_ioctl+0x19f/0x1be > [<c0265768>] sock_ioctl+0x0/0x1be > [<c017a0e9>] do_ioctl+0x21/0xa0 > [<c0266664>] sys_socket+0x2b/0x40 > [<c017a39f>] vfs_ioctl+0x237/0x249 > [<c017a3fd>] sys_ioctl+0x4c/0x67 > [<c0104e22>] sysenter_past_esp+0x6b/0xa9
This driver is ancient. Can you please try a recent b43, like the one from 2.6.24.1? -- Greetings Michael. _______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
