I've tried to flash the card, but something went wrong again. It
seemed to accept the flash, but upon reboot, the card became
PCI\VEN=14E4&DEV=0008&SUBSYS=00071128. Trying to add "0008" to
b43-pci-bridge.c doesn't help anymore, as the SSB driver simply
freezes trying to activate the card under B43. Is there a way to make
it just load the card to the point where SSB_SPROM appears, but so it
doesn't crash?
BTW, here is the relevant lspci -v dump:
04:06.0 Unclassified device [000d]: Broadcom Corporation Unknown
device 0008 (rev 02) (prog-if be)
Subsystem: Unknown device 1128:0007
Flags: bus master, fast devsel, latency 64, IRQ 11
I/O ports at e800 [size=256]
Memory at faf00000 (32-bit, prefetchable) [disabled] [size=1M]
Expansion ROM at feb00000 [disabled] [size=16K]
Capabilities: [40] Power Management version 2
And from lspci -vn (showing device IDs):
04:06.0 000d: 14e4:0008 (rev 02) (prog-if be)
Subsystem: 1128:0007
Flags: bus master, fast devsel, latency 64, IRQ 11
I/O ports at e800 [size=256]
Memory at faf00000 (32-bit, prefetchable) [disabled] [size=1M]
Expansion ROM at feb00000 [disabled] [size=16K]
Capabilities: [40] Power Management version 2
I think the problem is "Unclassified device [000d]".
On 4/1/08, Michael Buesch <[EMAIL PROTECTED]> wrote:
> On Monday 31 March 2008 22:22:54 Stefanik Gábor wrote:
> > Thanks, now I got the ssb_sprom file in place, but it's completely
> > corrupt (0120FFFFFFFF...FFFFFFFFFFFF until the end, ssb-sprom says CRC
> > error, if I run it with --force -P, I get FFFF for all values). Could
> > someone upload an SPROM dump for his card (preferably a 4318 or
> > possibly a 4311)? Because I didn't have an SPROM backup.
>
> Attached is the SPROM of one of my 4318 cards.
> If you're going to flash that, please change the MAC address first.
> Your MAC address is written on either the card or the machine it's built-in.
>
> Please also remember that the SPROM contains card-specific calibration
> values for the TX amplifiers. So you might suffer from bad performance,
> as the values obviously don't fit to your card.
>
>
>
> --
> Greetings Michael.
>
--
Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-)
_______________________________________________
Bcm43xx-dev mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
