On Thursday 18 September 2008 15:47:42 Larry Finger wrote: > Ivo van Doorn wrote: > > > Is dev->phy.radio_on set when mac80211 has send an instruction > > to the driver to enable the radio (start() or config() callback) > > or does it represent the key state in the hardware? > > > > If it is something coming from mac80211, then you do not want > > to send a SOFT_BLOCKED event since that will cause all other radios > > to be switched off simply because the b43 interface has not been > > enabled. > > > > Off course when it represents the key state in the hardware then the > > code would be fine... > > The state comes from mac80211 and is set in the config() callback. > > What state should be sent at the point when the hardware block is > removed? It seems to me that forcing an UNBLOCKED state gives the > wrong result. Perhaps RFKILL does need to have 4 states so that an > RFKILL_STATE_HW_UNBLOCKED state can be transmitted.
If sw is unblocked, but hw is still blocked, you must not announce unblocked state to rfkill. -- Greetings Michael. _______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
