On Tuesday 24 March 2009 14:24:45 RuXu W. wrote:
> when I back to 2.6.28.8 , all is right.
> 2.6.29 is more unstable for bcm4318 card.
Please check your hardware:
b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
Machine check in kernel mode.
Caused by (from SRR1=149030): Transfer error ack signal
Oops: Machine check, sig: 7 [#1]
PowerMac
Modules linked in: ssb(+) rng_core mac80211 cfg80211 loop snd_aoa_codec_tas
snd_aoa_fabric_layout snd_aoa snd_aoa_i2sbus snd_pcm snd_page_alloc snd_seq
snd_timer snd_seq_device evdev snd soundcore i2c_powermac ide_cd_mod cdrom
snd_aoa_soundbus ehci_hcd appletouch uninorth_agp agpgart [last unloaded: btusb]
NIP: e2390f18 LR: e23911f4 CTR: c002291c
REGS: df253bb0 TRAP: 0200 Not tainted (2.6.29)
MSR: 00149030 <EE,ME,IR,DR> CR: 22000482 XER: 20000000
TASK = dfa68610[1323] 'modprobe' THREAD: df252000
GPR00: e23911f4 df253c60 dfa68610 00000000 00000090 00000080 00000004 df253c08
GPR08: c03e5000 00000ffc 00000000 08006b80 df844800 10020390 100e0000 100df49c
GPR16: 100b54c0 100df49c 100ddd20 100ffc28 100b5340 100fefc8 00000000 00000000
GPR24: 100ee008 e2390000 e2391efc e2397be8 00000000 00000000 e23a0000 df8a6c00
NIP [e2390f18] ssb_bus_scan+0x74/0x558 [ssb]
LR [e23911f4] ssb_bus_scan+0x350/0x558 [ssb]
Call Trace:
[df253c60] [e23911f4] ssb_bus_scan+0x350/0x558 [ssb] (unreliable)
[df253c90] [e23909bc] ssb_bus_register+0x10c/0x218 [ssb]
[df253d10] [e2390b70] ssb_bus_pcibus_register+0x40/0x74 [ssb]
[df253d20] [e2392954] ssb_pcihost_probe+0xb0/0xe0 [ssb]
[df253d40] [c0161550] local_pci_probe+0x24/0x34
[df253d50] [c0161e50] pci_device_probe+0x84/0xa8
[df253d80] [c01c98b0] driver_probe_device+0xb4/0x1e8
[df253da0] [c01c9a88] __driver_attach+0xa4/0xa8
[df253dc0] [c01c905c] bus_for_each_dev+0x5c/0xa4
[df253df0] [c01c96cc] driver_attach+0x24/0x34
[df253e00] [c01c89c0] bus_add_driver+0x1d4/0x248
[df253e30] [c01c9cfc] driver_register+0x70/0x158
[df253e50] [c0162100] __pci_register_driver+0x4c/0xac
[df253e70] [e2392780] ssb_pcihost_register+0x50/0x60 [ssb]
[df253e80] [e239a0d0] b43_pci_ssb_bridge_init+0x18/0xa8 [ssb]
[df253e90] [e239a074] ssb_modinit+0x74/0xb8 [ssb]
[df253eb0] [c0003c58] do_one_initcall+0x34/0x1b8
[df253f20] [c005b5b8] sys_init_module+0xb4/0x1b4
[df253f40] [c0015a34] ret_from_syscall+0x0/0x38
--- Exception: c01 at 0xff63044
LR = 0x10003c80
Instruction dump:
813f0010 93df0000 2f890001 419e02f4 69290002 817f0000 3129ffff 7d294910
55290028 39290ffc 7c0004ac 7d6b4c2c <0c0b0000> 4c00012c 71608ff0 39200000
---[ end trace 0c10a35a4c3e97ab ]---
--
Greetings, Michael.
_______________________________________________
Bcm43xx-dev mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
