On 01/10/2010 04:51 PM, Éric Piel wrote: > Hello, > > I've got a bcm43 with LP-PHY (14e4:4315, rev 01). The b43 driver seems > to work fine (since 2.6.32), excepted when WPA is used. When there is no > encryption, or just WEP, there is no problem. However, when I try to > connect to a AP with WPA (which works from Windows, and also with the wl > driver), it fails to associate. wpa_cli shows me this messages repeatedly: > <2>Trying to associate with 00:18:84:15:d3:3e (SSID='MyPlace9' freq=2412 > MHz) > <2>Authentication with 00:18:84:15:d3:3e timed out. > > There doesn't seem to be any interesting error message in dmesg. > I've just tried with Linus'git head, and it's the same result. The > firmware loaded is noted as 478.104 in dmesg. > > What can I do to try to debug this?
The problem is not general. I use b43 with a 4315 device with WPA or WPA2 without difficulty. Are you using NetworkManager? If so, look at /var/log/NetworkManager. If not, then you need to start wpa_supplicant separately with the -ddd option. Larry _______________________________________________ Bcm43xx-dev mailing list Bcm43xx-dev@lists.berlios.de https://lists.berlios.de/mailman/listinfo/bcm43xx-dev