Op 11-01-10 00:56, Larry Finger schreef: > On 01/10/2010 04:51 PM, Éric Piel wrote: >> Hello, >> >> I've got a bcm43 with LP-PHY (14e4:4315, rev 01). The b43 driver seems >> to work fine (since 2.6.32), excepted when WPA is used. When there is no >> encryption, or just WEP, there is no problem. However, when I try to >> connect to a AP with WPA (which works from Windows, and also with the wl >> driver), it fails to associate. wpa_cli shows me this messages repeatedly: >> <2>Trying to associate with 00:18:84:15:d3:3e (SSID='MyPlace9' freq=2412 >> MHz) >> <2>Authentication with 00:18:84:15:d3:3e timed out. >> >> There doesn't seem to be any interesting error message in dmesg. >> I've just tried with Linus'git head, and it's the same result. The >> firmware loaded is noted as 478.104 in dmesg. >> >> What can I do to try to debug this? > > The problem is not general. I use b43 with a 4315 device with WPA or WPA2 > without difficulty. > > Are you using NetworkManager? If so, look at /var/log/NetworkManager. If not, > then you need to start wpa_supplicant separately with the -ddd option. I'm using Mandriva's network manager (which is basically just a frontend to wpa_supplicant). However, now that I try just with wpa_supplicant, it works fine!
I'll investigate a bit further, it's probably a bug in the frontend. Thanks a lot, Eric _______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
