http://blog.galemin.com/2011/04/li-5m03-camera-on-beagleboard-xm/
Gerald On Mon, Sep 23, 2013 at 2:33 PM, Gerald Coley <[email protected]>wrote: > There is a camera module already available for the -xM. Schematics should > also be available. > > > Gerald > > > On Mon, Sep 23, 2013 at 11:01 AM, <[email protected]> wrote: > >> Here is some of my learning in the last few days. >> -Most likely an interface board is required if you would like to >> connect your camera to BB via the camera interface. >> -Then you may need to implement your own driver which >> works/communicates fine with the new board. >> -The new board needs to be initialized while start-up in >> kernel/arch/arm/.... platform specific file. >> -The new driver needs to be added into Kconfig. >> -Keyword is "I2C_BOARD_INFO("name", I2C_ADDR)" to set I2C address >> specific to the new board. >> -Don't forget that the probe function will be called when the >> device is detected at I2C ADDR. >> >> Any additions/corrections are welcome. >> >> Regards, >> Ozkan. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
