About SD card Fsl will have the 200M clk support for SDHC ,this will same speed as eMMC 4.4 8bit DDR mode Only depend how much of your SD card
On my board , imx6 SOLO , ARM@800M 16bit DDR3 @400M ,ONFI 2.0 8bit nand @100M clock In wayland + QT 5.1.1 8 seconds can login to wayland-terminal console almost 8s can run Qt HelloWindow with wayland egl SD CARD will not be bottle neck , 2013/9/26 Maxim Podbereznyy <[email protected]> > I don't know which Freescale platform you have chosen but based on my > experience with both Wandboard and Sabre Lite - imx6 running from a SD card > is extremely slow. By slow I mean that even such stupid command like "ls" > can complete up to 1 minute. Impressed? > 26.09.2013 18:25 пользователь "Diogene" <[email protected]> написал: > > It just a beginning for TI ARM testing. >> We will go to Freescale products. >> Much more efficient. >> >> For your information, Win Ce has same problems ... >> This project is not a company project but a community project. >> In fact, Angstrom distrib is OK. Ubuntu ported on it is Hawfull!!! >> >> Regards. >> >> Le jeudi 26 septembre 2013 15:25:32 UTC+2, Mickae1 a écrit : >>> >>> well, you shouldn't blame the company behind the BBB, neither the >>> community. >>> >>> *It's entirely your fault*, you decided for your product to use open >>> source solution ! >>> >>> Yes it's attractive, you don't need to buy a license for windows CE, >>> but you should have made some research and discovered since we moved to the >>> new kernel, not all of the functions are available. >>> >>> *It's unacceptable for a company to bet that the BBB will work in few >>> months ....* >>> >>> In my case, i was at the same position as you 6 months ago, I wanted to >>> use the RS485 Cap ... and you know what ? I decided to spend 2 months to >>> find out how to modify the drivers. And now It's working ! ( Thx again >>> everyone for your help again) >>> >>> >>> So, you should instead blame yourself or spend some time to help us, and >>> find out what's wrong with the LCD...... . >>> >>> IF you don't have TIME, give some money to this community and I'm sure >>> that a developer will put this bug in priority. >>> >>> >>> Michael Musset, >>> >>> >>> On Thu, Sep 26, 2013 at 2:59 PM, garyamort <[email protected]> wrote: >>> >>>> >>>> >>>> On Thursday, September 26, 2013 5:09:30 AM UTC-4, Diogene wrote: >>>>> >>>>> We have tested BBB with LCD7 cape and Unbuntu 12.04 & 13.04. >>>>> Nothing does work as expected!!! >>>>> Use of Touchscreen is hawfully slow and use of ADC with this screen >>>>> hangs up the system! >>>>> >>>>> How to get a such bad system. It is the same with angstrom distrib!!! >>>>> >>>>> We had developp a specific cape and we can put it in garbage!!! >>>>> >>>>> >>>> I'll happily pay for shipping if you want to send me the cape and >>>> board. :-) >>>> >>>> >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to beagleboard...@**googlegroups.com. >>>> For more options, visit >>>> https://groups.google.com/**groups/opt_out<https://groups.google.com/groups/opt_out> >>>> . >>>> >>> >>> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
