I don't know which kernel you are currently using but it is worth to try to set camera=li5m03. Also, please check if the probe of mt9p031 driver is called. If it is not, you need to also check its I2C address settings. Hope this helps!
Regards, Ozkan. On Tuesday, October 22, 2013 5:01:32 AM UTC+1, [email protected] wrote: > > I am a freshman with beagleboard-xM Rev C. And i want use the lbcm5m1 > camera moudle with angstrom OS which i made according to the website( > http://circuitco.com/support/index.php?title=BeagleBoard-xM). After this, > i do like this: > > $opkg update > > $opkg install kernel-module-mt9p031 > > $opkg install ntpdate > > $sync > > then, i set u-boot.bin in uEnv.txt like camera=lbcm5m03 or camera=lbcm5m1. > Unfortunately, both of them are failed. > > Now, i cann't find /dev/video1 in directory /dev. > > i also compile the kernel according to the website > https://github.com/Aptina/BeagleBoard-xM/blob/master/MT9P031/Angstrom/README_MT9P031.txt,but > > after load the kernel, the information like this would come out : > > [ 153.071716] mt9p031 2-0048: Unable to initialize sensor > > > [ 154.132324] i2c_omap i2c_omap.2: controller timed out > > > [ 155.351165] i2c_omap i2c_omap.2: controller timed out waiting for start > condh > > i will be grateful for your help. i hope someone will guide me or point my > errors. > > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
