It takes 45min to flash when booting a flasher from the SD card while holding the boot button down at power up when running from a 1A 5VDC external supply. It is possible that the SD card holder can get damaged. It is a push to eject connector.
Gerald On Wed, Oct 30, 2013 at 7:33 PM, <[email protected]> wrote: > Thanks... I'm getting it with the angstrom emmc flasher(latest image) as > well. > > On Wednesday, October 30, 2013 5:28:19 PM UTC-7, RobertCNelson wrote: > >> On Wed, Oct 30, 2013 at 4:49 PM, <infinity....@gmail.**com> wrote: >> > Heya, I have been experimenting with different distro's on the BBB, >> trying >> > to find the one that works for what I want. Gotta admit this thing is >> > touchy and cumbersome, sometimes boot's, sometimes doesn't. Now upon >> trying >> > to flash the emmc I get four user led's blinking synchronously! The >> only >> > doc's I can find on this state that I have used up my limit flashing >> the >> > emmc. Please tell me this isn't true?!?! If so, this would be absurd >> to me >> > as I have only re-flashed it under ten times. >> > >> > Can someone please advise if this is the case, or is there something >> else >> > wrong? I don't have a serial connection and don't want to waste any >> money >> > on getting one to see the error code if this is in fact the case! >> >> Ahh, as you don't specify which image, that sounds like my >> ubuntu/debian image. (please confirm which image you used...) >> >> First make sure NO capes are installed. You can leave the ethernet >> plugged in but nothing else, not even the 'expansion' cape board.. >> Make sure your using 5Volt DC power. >> >> I only have one board that shows the same issue, but it was a very >> very early pre-production one.. (The eMMC on that one had been >> re-written way to many times..) >> >> Regards, >> >> -- >> Robert Nelson >> http://www.rcn-ee.com/ >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
