Sounds like the eMMC may have been corrupted when you pulled the power. My suggestion it to try and reflash the eMMC with the factory image and see if that brings it back to life.
http://www.elinux.org/Beagleboard:Updating_The_Software Gerald On Mon, Nov 11, 2013 at 11:46 PM, Dominik Fretz <[email protected]> wrote: > Hey, > > i was playing again with my BBB and after I disconnected my power supply > and reconnected it, the BBB doesn't start anymore. > > The green LED of the Ethernet port is constantly on, even if no network > cable is connected as soon as power is established. > The 4 user leds light up one after the other, den turn of. Followed by a > quick burst of all of them, then the 3rd one is constantly on. > > The BBB doesn't show up in the hardware list (ubuntu) if I connect it > through USB.... > > > Any clue? Is my board dead? > > Regards, > Dominik > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
