Craig, thanks but doesn't change anything. After powering it back on, the green enthernet LED still lights up even without a network cable...
On Wednesday, November 13, 2013 9:38:44 AM UTC+11, [email protected] wrote: > > Also, according to the circuitco wiki, > "When removing power, hold the reset button DOWN. This puts everything in > reset, lowers the system power, and leaves enough power in the capacitors > to allow the PMIC to complete the power down cycle properly. " > http://circuitco.com/support/index.php?title=BeagleBone > > On Tuesday, November 12, 2013 9:34:15 AM UTC-5, Gerald wrote: >> >> Sounds like the eMMC may have been corrupted when you pulled the power. >> My suggestion it to try and reflash the eMMC with the factory image and see >> if that brings it back to life. >> >> http://www.elinux.org/Beagleboard:Updating_The_Software >> >> Gerald >> >> >> >> On Mon, Nov 11, 2013 at 11:46 PM, Dominik Fretz <[email protected]>wrote: >> >>> Hey, >>> >>> i was playing again with my BBB and after I disconnected my power supply >>> and reconnected it, the BBB doesn't start anymore. >>> >>> The green LED of the Ethernet port is constantly on, even if no network >>> cable is connected as soon as power is established. >>> The 4 user leds light up one after the other, den turn of. Followed by a >>> quick burst of all of them, then the 3rd one is constantly on. >>> >>> The BBB doesn't show up in the hardware list (ubuntu) if I connect it >>> through USB.... >>> >>> >>> Any clue? Is my board dead? >>> >>> Regards, >>> Dominik >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
