Robert, after much headscratching at the various Angstrom download and instruction pages, which seem to be in various stages of bit-rot, I switched my attention to your stuff, which seems a lot more well maintained.
I'm now using omap-image-builder to create an image. I have chosen to work with Ubuntu raring. I was hoping to recreate the process to build your posted flashers, such as: https://rcn-ee.net/deb/flasher/raring/BBB-eMMC-flasher-ubuntu-13.04-2013-10-08.img ...which has a working usb0 network interface and does flash the eMMC when booted with the user button pressed. I use the following commands: cd omap-image-builder ./build-image.sh cd deploy/ubuntu-13.04-console-armhf-2013-11-17 ./setup_sdcard.sh --img cs-installer.img --uboot bone --bbb-flasher dd bs=1M if=cs-installer.img of=/dev/sdb Now booting from this SD-Card works, but I get no usb0 network interface. And there is a file called flash-eMMC.txt on the card, but it does not flash if booted while holding the user button pressed. What am I missing here? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
