I just experienced the exact same behavior. I got my board last night, played around with some script to flash some LEDs and then flashed an update. I grabbed the emmc flasher for BBB, ran that this morning. when I came back after about an hour all 4 LEDs were blue which I believe means success. Now I can't get my computer to recognize the device. It starts up and the LEDs flash just like they were before as if it is talking to something or maybe it's just trying to talk to something.
I installed 64-bit windows driver successfully on a windows 7 64 bit. On Monday, November 11, 2013 7:28:55 AM UTC-8, Richard Pesce wrote: > > Nope, I gave up on the whole project. Someday I'll try for a replacement. > On Nov 11, 2013 6:49 AM, <[email protected] <javascript:>> wrote: > >> did you ever get it fix? >> I'm having the same problem >> >> On Monday, June 24, 2013 9:14:34 AM UTC-4, Gerald wrote: >>> >>> Richardson,tx >>> >>> Gerald >>> >>> >>> On Mon, Jun 24, 2013 at 8:13 AM, Richard Pesce <[email protected]>wrote: >>> >>>> Sweet! Thank you! >>>> >>>> Where is the depot? >>>> On Jun 24, 2013 5:07 AM, "Gerald Coley" <[email protected]> wrote: >>>> >>>>> You pay shipping to the depot. They pay shipping back. Repairs are >>>>> free as long as there is no obvious abuse. >>>>> >>>>> Depending on where you live, another board may end up being cheaper, >>>>> but it is hard to say. >>>>> >>>>> Gerald. >>>>> >>>>> >>>>> On Sun, Jun 23, 2013 at 10:50 PM, Richard Pesce >>>>> <[email protected]>wrote: >>>>> >>>>>> Just curious, if the usb is damaged. (which I don't suspect) >>>>>> >>>>>> What is the cost for repairs, shipping etc? >>>>>> >>>>>> I might just buy another board since this one is still usable sans >>>>>> the usb connection. >>>>>> >>>>>> What is the cost for shipping etc if it isn't damaged? >>>>>> >>>>>> Thanks! >>>>>> On Jun 23, 2013 8:20 PM, "Richard Pesce" <[email protected]> wrote: >>>>>> >>>>>>> Eesh! Ok, but I don't know how I could have damaged it when all I >>>>>>> did was flash the update! >>>>>>> >>>>>>> Either way, I'm very excited to get it working again! >>>>>>> On Jun 23, 2013 8:15 PM, "Gerald Coley" <[email protected]> >>>>>>> wrote: >>>>>>> >>>>>>>> Sounds like you may have damaged the USB connection then. Might as >>>>>>>> well do an RMA and get it sent in to be checked. If it tests good, >>>>>>>> well we >>>>>>>> can take it from there and see what we can figure out. >>>>>>>> >>>>>>>> http://beagleboard.org/Support/RMA >>>>>>>> >>>>>>>> Gerald >>>>>>>> >>>>>>>> >>>>>>>> On Sun, Jun 23, 2013 at 10:12 PM, Richard Pesce < >>>>>>>> [email protected]> wrote: >>>>>>>> >>>>>>>>> Hey Gerald, >>>>>>>>> >>>>>>>>> Attached are the screenshots.... There were 3 devices connected >>>>>>>>> before attaching the BBB and 3 afterwards... >>>>>>>>> >>>>>>>>> I'm not sure what to do next! >>>>>>>>> >>>>>>>>> >>>>>>>>> On Sun, Jun 23, 2013 at 8:01 PM, Gerald Coley < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>>> Ahh, OK. That makes a difference. Try the utility and see if it >>>>>>>>>> shows up an d it may be missing the driver or there is something it >>>>>>>>>> does >>>>>>>>>> not like. >>>>>>>>>> >>>>>>>>>> Gerald >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Sun, Jun 23, 2013 at 9:57 PM, Richard Pesce < >>>>>>>>>> [email protected]> wrote: >>>>>>>>>> >>>>>>>>>>> Thanks, I will try that now! >>>>>>>>>>> >>>>>>>>>>> I should clarify, I'm able to ssh in via the network (cat5) but >>>>>>>>>>> not via usb. >>>>>>>>>>> On Jun 23, 2013 7:53 PM, "Gerald Coley" <[email protected]> >>>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>>> What I can't figure out is why it worked once and not after the >>>>>>>>>>>> updates. And the fact that you can SSH in says the USB is working >>>>>>>>>>>> fine as >>>>>>>>>>>> it uses the USB connection for that. I have windows 7 myself. >>>>>>>>>>>> >>>>>>>>>>>> There is utility that FTDI has that lets you look at all of the >>>>>>>>>>>> USB ports. Try this and see if the USB port shows up. when plugged >>>>>>>>>>>> in and >>>>>>>>>>>> goes away if you remove it. >>>>>>>>>>>> >>>>>>>>>>>> http://www.ftdichip.com/Support/Utilities/usbview.zip >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Gerald >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Sun, Jun 23, 2013 at 9:46 PM, Richard Pesce < >>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Sure thing! The device doesn't show up on either of my >>>>>>>>>>>>> windows 7 machines. >>>>>>>>>>>>> >>>>>>>>>>>>> No new devices appear in my device list, no new drives in >>>>>>>>>>>>> computer management and no tell tale hot plug sound of the usb >>>>>>>>>>>>> connection >>>>>>>>>>>>> either. >>>>>>>>>>>>> >>>>>>>>>>>>> I'll try again soon on a few more windows machines. >>>>>>>>>>>>> >>>>>>>>>>>>> Are there any logs or further troubleshooting I can do? >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks again for the assistance! I appreciate it! >>>>>>>>>>>>> On Jun 23, 2013 7:39 PM, "Gerald Coley" < >>>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> OK. Those instructions are fine. I wrote them. If you can SSH >>>>>>>>>>>>>> in, then the HW is working fine. >>>>>>>>>>>>>> >>>>>>>>>>>>>> So I think the issue is on the Windows 7 side. Can you look >>>>>>>>>>>>>> in Explorer and see if the BeagleBone device shows up at all? >>>>>>>>>>>>>> >>>>>>>>>>>>>> Gerald >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Sun, Jun 23, 2013 at 9:35 PM, Richard Pesce < >>>>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hey Gerald! >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> No, I followed the instructions on: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> http://circuitco.com/support/index.php?title=Updating_The_ >>>>>>>>>>>>>>> Software >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Which said: >>>>>>>>>>>>>>> To force a boot from the microSD card, delete the MLO file >>>>>>>>>>>>>>> in the FAT partition of the eMMC. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I removed the file while ssh'd in, and verified that it >>>>>>>>>>>>>>> booted the different version. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Still no joy! >>>>>>>>>>>>>>> On Jun 23, 2013 7:30 PM, "Gerald Coley" < >>>>>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Did you hold the boot button down when you powered on the >>>>>>>>>>>>>>>> board? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Gerald >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Sun, Jun 23, 2013 at 9:23 PM, Richard Pesce < >>>>>>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I flashed this SD boot >>>>>>>>>>>>>>>>> image<https://s3.amazonaws.com/angstrom/demo/beaglebone/Angstrom-Cloud9-IDE-GNOME-eglibc-ipk-v2012.12-beaglebone-2013.06.06.img.xz> >>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>> still the BBB will not mount as a usb drive as it did when I >>>>>>>>>>>>>>>>> received it. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Any suggestions? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Thursday, June 20, 2013 9:31:44 PM UTC-7, Richard Pesce >>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Hello all! >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I recently received my Beaglebone Black. I followed the >>>>>>>>>>>>>>>>>> getting started guide >>>>>>>>>>>>>>>>>> HERE<http://beagleboard.org/Getting%20Started>, >>>>>>>>>>>>>>>>>> installed the drivers. Afterwards I was able to connect to >>>>>>>>>>>>>>>>>> http://192.168.7.2 and use cloud9 etc. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I got to the "Update board with latest software" portion >>>>>>>>>>>>>>>>>> and downloaded >>>>>>>>>>>>>>>>>> BBB-eMMC-flasher-2013.06.06.img.xz<https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.06.06.img.xz> >>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>> flashed the eMMC successfully. I removed the power, ejected >>>>>>>>>>>>>>>>>> the uSD and >>>>>>>>>>>>>>>>>> then connected to the computer via USB and the BBB wouldn't >>>>>>>>>>>>>>>>>> mount as a USB >>>>>>>>>>>>>>>>>> drive. Fearing the update failed, I tried again with the >>>>>>>>>>>>>>>>>> same image. That >>>>>>>>>>>>>>>>>> failed... so I tried >>>>>>>>>>>>>>>>>> BBB-eMMC-flasher-2013.06.20.img.xz<https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.06.20.img.xz> >>>>>>>>>>>>>>>>>> from >>>>>>>>>>>>>>>>>> HERE<http://circuitco.com/support/index.php?title=Updating_The_Software> >>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>> flashed again... still no USB drive. I then tried >>>>>>>>>>>>>>>>>> BBB-eMMC-flasher-2013.06.17.img.xz<http://downloads.angstrom-distribution.org/demo/beaglebone/BBB-eMMC-flasher-2013.06.17.img.xz> >>>>>>>>>>>>>>>>>> from >>>>>>>>>>>>>>>>>> HERE<http://downloads.angstrom-distribution.org/demo/beaglebone/>... >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> still no USB drive. In a last ditch effort I tried (Current >>>>>>>>>>>>>>>>>> Production >>>>>>>>>>>>>>>>>> Image) >>>>>>>>>>>>>>>>>> BBB-eMMC-flasher-2013.05.20.img.xz<https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.05.20.img.xz> >>>>>>>>>>>>>>>>>> from >>>>>>>>>>>>>>>>>> HERE<http://circuitco.com/support/index.php?title=Updating_The_Software>... >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> still no USB drive. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> LINUX: >>>>>>>>>>>>>>>>>> It is important to note that I could SSH into all of >>>>>>>>>>>>>>>>>> these installs (not at http://192.168.7.2 though), and >>>>>>>>>>>>>>>>>> verified that everything worked.... I can see >>>>>>>>>>>>>>>>>> /dev/mmcblk0p1 is mounted >>>>>>>>>>>>>>>>>> at /media/BEAGLEBONE (with my most current flash) and all >>>>>>>>>>>>>>>>>> the files are >>>>>>>>>>>>>>>>>> present. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> WINDOWS: >>>>>>>>>>>>>>>>>> I searched in device manager and could not see the BBB at >>>>>>>>>>>>>>>>>> all or any unknown or not working hardware. And in computer >>>>>>>>>>>>>>>>>> management/Disk management there isn't anything present. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I have attempted other computers (WIN7) and multiple USB >>>>>>>>>>>>>>>>>> ports.... same issue, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Anyone have any suggestions? I'm sure I am missing >>>>>>>>>>>>>>>>>> something obvious. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Thank you in advance! >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>>>>>>>>> --- >>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>> the Google Groups "BeagleBoard" group. >>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>> from it, send an email to [email protected]. >>>>>>>>>>>>>>>>> For more options, visit https://groups.google.com/ >>>>>>>>>>>>>>>>> groups/opt_out. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> Gerald >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> [email protected] >>>>>>>>>>>>>>>> [email protected] >>>>>>>>>>>>>>>> http://beagleboard.org/ >>>>>>>>>>>>>>>> http://circuitco.com/support/ >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>>>>>>>> --- >>>>>>>>>>>>>>>> You received this message because you are subscribed to a >>>>>>>>>>>>>>>> topic in the Google Groups "BeagleBoard" group. >>>>>>>>>>>>>>>> To unsubscribe from this topic, visit >>>>>>>>>>>>>>>> https://groups.google.com/d/topic/beagleboard/Fz64scAbfwo/ >>>>>>>>>>>>>>>> unsubscribe. >>>>>>>>>>>>>>>> To unsubscribe from this group and all its topics, send an >>>>>>>>>>>>>>>> email to [email protected]. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> For more options, visit https://groups.google.com/ >>>>>>>>>>>>>>>> groups/opt_out. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>>>>>>> --- >>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>> Google Groups "BeagleBoard" group. >>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>> from it, send an email to [email protected]. >>>>>>>>>>>>>>> For more options, visit https://groups.google.com/ >>>>>>>>>>>>>>> groups/opt_out. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> Gerald >>>>>>>>>>>>>> >>>>>>>>>>>>>> [email protected] >>>>>>>>>>>>>> [email protected] >>>>>>>>>>>>>> http://beagleboard.org/ >>>>>>>>>>>>>> http://circuitco.com/support/ >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>>>>>> --- >>>>>>>>>>>>>> You received this message because you are subscribed to a >>>>>>>>>>>>>> topic in the Google Groups "BeagleBoard" group. >>>>>>>>>>>>>> To unsubscribe from this topic, visit >>>>>>>>>>>>>> https://groups.google.com/d/topic/beagleboard/Fz64scAbfwo/ >>>>>>>>>>>>>> unsubscribe. >>>>>>>>>>>>>> To unsubscribe from this group and all its topics, send an >>>>>>>>>>>>>> email to [email protected]. >>>>>>>>>>>>>> For more options, visit https://groups.google.com/ >>>>>>>>>>>>>> groups/opt_out. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>>>>> --- >>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>> Google Groups "BeagleBoard" group. >>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>>> For more options, visit https://groups.google.com/ >>>>>>>>>>>>> groups/opt_out. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> Gerald >>>>>>>>>>>> >>>>>>>>>>>> [email protected] >>>>>>>>>>>> [email protected] >>>>>>>>>>>> http://beagleboard.org/ >>>>>>>>>>>> http://circuitco.com/support/ >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>>>> --- >>>>>>>>>>>> You received this message because you are subscribed to a topic >>>>>>>>>>>> in the Google Groups "BeagleBoard" group. >>>>>>>>>>>> To unsubscribe from this topic, visit >>>>>>>>>>>> https://groups.google.com/d/topic/beagleboard/Fz64scAbfwo/ >>>>>>>>>>>> unsubscribe. >>>>>>>>>>>> To unsubscribe from this group and all its topics, send an >>>>>>>>>>>> email to [email protected]. >>>>>>>>>>>> For more options, visit https://groups.google.com/ >>>>>>>>>>>> groups/opt_out. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>>> --- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "BeagleBoard" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>> For more options, visit https://groups.google.com/groups/opt_out >>>>>>>>>>> . >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> Gerald >>>>>>>>>> >>>>>>>>>> [email protected] >>>>>>>>>> [email protected] >>>>>>>>>> http://beagleboard.org/ >>>>>>>>>> http://circuitco.com/support/ >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>> --- >>>>>>>>>> You received this message because you are subscribed to a topic >>>>>>>>>> in the Google Groups "BeagleBoard" group. >>>>>>>>>> To unsubscribe from this topic, visit >>>>>>>>>> https://groups.google.com/d/topic/beagleboard/Fz64scAbfwo/ >>>>>>>>>> unsubscribe. >>>>>>>>>> To unsubscribe from this group and all its topics, send an email >>>>>>>>>> to [email protected]. >>>>>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>> --- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "BeagleBoard" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> Gerald >>>>>>>> >>>>>>>> [email protected] >>>>>>>> [email protected] >>>>>>>> http://beagleboard.org/ >>>>>>>> http://circuitco.com/support/ >>>>>>>> >>>>>>>> -- >>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>> --- >>>>>>>> You received this message because you are subscribed to a topic in >>>>>>>> the Google Groups "BeagleBoard" group. >>>>>>>> To unsubscribe from this topic, visit https://groups.google.com/d/ >>>>>>>> topic/beagleboard/Fz64scAbfwo/unsubscribe. >>>>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>>>> [email protected]. >>>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> -- >>>>>> For more options, visit http://beagleboard.org/discuss >>>>>> --- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "BeagleBoard" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Gerald >>>>> >>>>> [email protected] >>>>> [email protected] >>>>> http://beagleboard.org/ >>>>> http://circuitco.com/support/ >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to a topic in the >>>>> Google Groups "BeagleBoard" group. >>>>> To unsubscribe from this topic, visit https://groups.google.com/d/ >>>>> topic/beagleboard/Fz64scAbfwo/unsubscribe. >>>>> To unsubscribe from this group and all its topics, send an email to >>>>> [email protected]. >>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>> >>>>> >>>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/groups/opt_out. >>>> >>>> >>>> >>> >>> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/Fz64scAbfwo/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected] <javascript:>. >> For more options, visit https://groups.google.com/groups/opt_out. >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
