Same problem here. It worked on Windows 7 initially but no longer. On Thursday, June 20, 2013 9:31:44 PM UTC-7, Richard Pesce wrote: > > Hello all! > > I recently received my Beaglebone Black. I followed the getting started > guide HERE <http://beagleboard.org/Getting%20Started>, installed the > drivers. Afterwards I was able to connect to http://192.168.7.2 and use > cloud9 etc. > > I got to the "Update board with latest software" portion and downloaded > BBB-eMMC-flasher-2013.06.06.img.xz<https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.06.06.img.xz> > and > flashed the eMMC successfully. I removed the power, ejected the uSD and > then connected to the computer via USB and the BBB wouldn't mount as a USB > drive. Fearing the update failed, I tried again with the same image. That > failed... so I tried > BBB-eMMC-flasher-2013.06.20.img.xz<https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.06.20.img.xz> > from > HERE<http://circuitco.com/support/index.php?title=Updating_The_Software> and > flashed again... still no USB drive. I then tried > BBB-eMMC-flasher-2013.06.17.img.xz<http://downloads.angstrom-distribution.org/demo/beaglebone/BBB-eMMC-flasher-2013.06.17.img.xz> > from HERE <http://downloads.angstrom-distribution.org/demo/beaglebone/>... > still no USB drive. In a last ditch effort I tried (Current Production > Image) > BBB-eMMC-flasher-2013.05.20.img.xz<https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.05.20.img.xz> > from > HERE<http://circuitco.com/support/index.php?title=Updating_The_Software>... > still no USB drive. > > > LINUX: > It is important to note that I could SSH into all of these installs (not > at http://192.168.7.2 though), and verified that everything worked.... I > can see /dev/mmcblk0p1 is mounted at /media/BEAGLEBONE (with my most > current flash) and all the files are present. > > WINDOWS: > I searched in device manager and could not see the BBB at all or any > unknown or not working hardware. And in computer management/Disk > management there isn't anything present. > > I have attempted other computers (WIN7) and multiple USB ports.... same > issue, > > > Anyone have any suggestions? I'm sure I am missing something obvious. > > > Thank you in advance! > > > >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
