I mean the schematic that defines what wires you are connecting where. You should never connect anything to the I2C bus that connects to the EEPROM. It also connects to the PMIC.
I suggest you connect to one of the I2C buses on the expansion headers. Gerald On Wed, Nov 27, 2013 at 1:01 PM, <[email protected]> wrote: > Thanks Gerald. > > I'm using this schematic > https://github.com/CircuitCo/BeagleBone-Black-RevA5A/blob/master/BBB_SCH.pdf?raw=true > > I'm trying to plug my device on the SDA and SCL pins of U7 (EEPROM). > > > On Wednesday, November 27, 2013 4:27:32 PM UTC-2, Gerald wrote: > >> You got a schematic? >> >> Gerald >> >> >> On Wed, Nov 27, 2013 at 10:55 AM, <[email protected]> wrote: >> >>> Hi, >>> I'm working on a project that uses 6 MPU6050 to detect body motion and I >>> can connect 4 of them on the beaglebone using the 2 i2c channels available >>> by PINs. >>> But I need to connect 2 more, so I was trying to solder right on the >>> board and access the i2c-0, and when I did, I successfuly detected using >>> i2cdetect -y -r 0, but just for a short amount of time. >>> Why it worked for just a brief moment? >>> How the i2c-0 works? >>> Why the i2c-0 is different than others i2c channels? >>> And finally, the golden question, how can I make it work? >>> >>> >>> PS.: I'm ashamed to have posted a lot of questions on my first post on >>> this forum. >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
