Scott, I tried building VLC using: bitbake vlc, but it fails, and I have no idea how to fix this. The output from the bitbake recipe is below. Any suggestions?
ERROR: Function failed: do_compile (see /media/brent/Disk2/oe/setup-scripts/build/tmp-angstrom_v2012_12-eglibc/work/beaglebone-angstrom-linux-gnueabi/omap3-sgx-modules-4.05.00.03-r23b/temp/log.do_compile.18454 for further information) ERROR: Logfile of failure stored in: /media/brent/Disk2/oe/setup-scripts/build/tmp-angstrom_v2012_12-eglibc/work/beaglebone-angstrom-linux-gnueabi/omap3-sgx-modules-4.05.00.03-r23b/temp/log.do_compile.18454 Log data follows: | DEBUG: Executing shell function do_compile | NOTE: make -j2 -e MAKEFLAGS= KERNEL_PATH=/media/brent/Disk2/oe/setup-scripts/build/tmp-angstrom_v2012_12-eglibc/sysroots/beaglebone/usr/src/kernel KERNEL_SRC=/media/brent/Disk2/oe/setup-scripts/build/tmp-angstrom_v2012_12-eglibc/sysroots/beaglebone/usr/src/kernel KERNEL_VERSION=3.8.13 CC=arm-angstrom-linux-gnueabi-gcc -mno-thumb-interwork -marm LD=arm-angstrom-linux-gnueabi-ld AR=arm-angstrom-linux-gnueabi-ar BUILD=release TI_PLATFORM=ti335x | make -C /media/brent/Disk2/oe/setup-scripts/build/tmp-angstrom_v2012_12-eglibc/sysroots/beaglebone/usr/src/kernel M=`pwd` | make[1]: Entering directory `/media/brent/Disk2/oe/setup-scripts/build/tmp-angstrom_v2012_12-eglibc/sysroots/beaglebone/usr/src/kernel' | CC [M] /media/brent/Disk2/oe/setup-scripts/build/tmp-angstrom_v2012_12-eglibc/work/beaglebone-angstrom-linux-gnueabi/omap3-sgx-modules-4.05.00.03-r23b/Graphics_SDK_4_05_00_03/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.o | /media/brent/Disk2/oe/setup-scripts/build/tmp-angstrom_v2012_12-eglibc/work/beaglebone-angstrom-linux-gnueabi/omap3-sgx-modules-4.05.00.03-r23b/Graphics_SDK_4_05_00_03/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c: In function 'bc_cat_init': | /media/brent/Disk2/oe/setup-scripts/build/tmp-angstrom_v2012_12-eglibc/work/beaglebone-angstrom-linux-gnueabi/omap3-sgx-modules-4.05.00.03-r23b/Graphics_SDK_4_05_00_03/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:612:6: error: implicit declaration of function 'cpu_is_omap3530' [-Werror=implicit-function-declaration] | /media/brent/Disk2/oe/setup-scripts/build/tmp-angstrom_v2012_12-eglibc/work/beaglebone-angstrom-linux-gnueabi/omap3-sgx-modules-4.05.00.03-r23b/Graphics_SDK_4_05_00_03/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:612:6: error: implicit declaration of function 'omap_rev' [-Werror=implicit-function-declaration] | /media/brent/Disk2/oe/setup-scripts/build/tmp-angstrom_v2012_12-eglibc/work/beaglebone-angstrom-linux-gnueabi/omap3-sgx-modules-4.05.00.03-r23b/Graphics_SDK_4_05_00_03/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:612:56: error: 'OMAP3430_REV_ES3_0' undeclared (first use in this function) | /media/brent/Disk2/oe/setup-scripts/build/tmp-angstrom_v2012_12-eglibc/work/beaglebone-angstrom-linux-gnueabi/omap3-sgx-modules-4.05.00.03-r23b/Graphics_SDK_4_05_00_03/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.c:612:56: note: each undeclared identifier is reported only once for each function it appears in | cc1: some warnings being treated as errors | make[3]: *** [/media/brent/Disk2/oe/setup-scripts/build/tmp-angstrom_v2012_12-eglibc/work/beaglebone-angstrom-linux-gnueabi/omap3-sgx-modules-4.05.00.03-r23b/Graphics_SDK_4_05_00_03/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.o] Error 1 | make[2]: *** [/media/brent/Disk2/oe/setup-scripts/build/tmp-angstrom_v2012_12-eglibc/work/beaglebone-angstrom-linux-gnueabi/omap3-sgx-modules-4.05.00.03-r23b/Graphics_SDK_4_05_00_03/GFX_Linux_KM/services4/3rdparty/bufferclass_ti] Error 2 | make[1]: *** [_module_/media/brent/Disk2/oe/setup-scripts/build/tmp-angstrom_v2012_12-eglibc/work/beaglebone-angstrom-linux-gnueabi/omap3-sgx-modules-4.05.00.03-r23b/Graphics_SDK_4_05_00_03/GFX_Linux_KM] Error 2 | make[1]: Leaving directory `/media/brent/Disk2/oe/setup-scripts/build/tmp-angstrom_v2012_12-eglibc/sysroots/beaglebone/usr/src/kernel' | make: *** [all] Error 2 | ERROR: oe_runmake failed | ERROR: Function failed: do_compile (see /media/brent/Disk2/oe/setup-scripts/build/tmp-angstrom_v2012_12-eglibc/work/beaglebone-angstrom-linux-gnueabi/omap3-sgx-modules-4.05.00.03-r23b/temp/log.do_compile.18454 for further information) ERROR: Task 1523 (/media/brent/Disk2/oe/setup-scripts/sources/meta-ti/recipes-bsp/powervr-drivers/omap3-sgx-modules_4.05.00.03.bb, do_compile) failed with exit code '1' NOTE: Tasks Summary: Attempted 2477 tasks of which 2475 didn't need to be rerun and 1 failed. Waiting for 0 running tasks to finish: Summary: 1 task failed: /media/brent/Disk2/oe/setup-scripts/sources/meta-ti/recipes-bsp/powervr-drivers/omap3-sgx-modules_4.05.00.03.bb, do_compile Summary: There was 1 WARNING message shown. Summary: There was 1 ERROR message shown, returning a non-zero exit code. On Saturday, November 23, 2013 11:34:49 PM UTC-5, Scott Force wrote: > > VLC does have a console interface via ncurses. I have used it on my > desktop system before under Arch Linux and it works quite well. > > http://wiki.videolan.org/Console > > I don't know which OS you are using but I did a quick search on this forum > and it seems that a VLC package is not available for Angstrom. But if you > search the forums there are a bunch of posts for compiling it. > > > > On Saturday, 23 November 2013 23:14:24 UTC-5, Brent wrote: >> >> Thanks for the response, but I am not using a window manager, so I can't >> use VLC. I need to be able to display the video on the frame buffer. I've >> also tried ffmpeg, but no luck there either. >> >> On Saturday, November 23, 2013 10:50:43 PM UTC-5, Scott Force wrote: >>> >>> I am in the process of ordering my very first BeagleBone Black so I >>> can't attest to how it plays videos. Maybe try a different video player >>> such as VLC and see if it makes a difference. >>> >>> >>> On Wednesday, 20 November 2013 15:15:06 UTC-5, Brent wrote: >>>> >>>> This should be straightforward, but I'm having some problems getting >>>> this to work. Using mplayer, I use the following command: mplayer -ao >>>> alsa >>>> -vo fbdev2 -zoom -x 800 -y 480 test.mpg >>>> >>>> Whenever I run this command, it shows the first frame, and then nothing >>>> else. I've tried .avi, .mpg, and .mp4 files, but they all have the same >>>> result. Has anyone been able to play videos on the BeagleBone Black? >>>> >>> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
