i powered up the board using a usb hub. On Saturday, December 7, 2013 7:50:59 PM UTC+6, ss sefat wrote: > > hi, i am trying to flash the eMMC from SD card.i have downloaded the image > file from > https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.09.04.img.xz. > i used 7zip to make to convert to .img file and wrote the img file using > win32 disk imager . then when i put the sd card on the sd slot of BBB and > connect the BBB using usb all the 4 LEDs lits up and nothing happens. i > left the BBB in this for about 2 hours connected with the usb and no led > blinked. all remain unlinked the hole time .then i unplugged the usb and > removed the SD card then plugged in the usb . bt nothing happens .what the > problem is. please help me . >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
