i powered the board from a usb hub. On Sunday, December 8, 2013 1:53:34 AM UTC+6, Gerald wrote: > > Did you follow the instructions on the Support Wiki? You are not supposed > to flash using USB power, so I am not sure you did.. > > Check the instructions and follow them exactly. > > http://www.elinux.org/Beagleboard:Updating_The_Software > > Gerald > > > > > > On Sat, Dec 7, 2013 at 7:50 AM, ss sefat <[email protected]<javascript:> > > wrote: > >> hi, i am trying to flash the eMMC from SD card.i have downloaded the >> image file from >> https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.09.04.img.xz. >> i used 7zip to make to convert to .img file and wrote the img file using >> win32 disk imager . then when i put the sd card on the sd slot of BBB and >> connect the BBB using usb all the 4 LEDs lits up and nothing happens. i >> left the BBB in this for about 2 hours connected with the usb and no led >> blinked. all remain unlinked the hole time .then i unplugged the usb and >> removed the SD card then plugged in the usb . bt nothing happens .what the >> problem is. please help me . >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> For more options, visit https://groups.google.com/groups/opt_out. >> > >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
