Dave,
Sorry for the short radio silence, I did get your message from the 6th,
and it was on my 'todo' stack. I was trying to find some boards for
shipment but failed and then I had to get a tape-out and PCBs made
before the PCB factory closes for the holidays.
All BeBoPr+ boards have been sold. It will be replaced by the BeBoPr++
that will provide the same functionality and more. I hope to make an
announcement soon. The tape-out mentioned before was for the BeBoPr++
revision 1. I've been testing a BeBoPr++ prototype for a while and it's
working properly, but I decided to improve the PWM output circuitry and
add a connector with an I2C bus. That makes it possible to add some I/O
expansion and/or a small LCD without needing extra hardware or soldering
wires directly to the board.
Watch the hardware announcements on the forum page!
-- Bas
On 10-12-2013 1:16, [email protected] wrote:
Yes, I saw that, and I did send email to that addy several days ago,
but no reply so far.
I will be more patient and give it some more time now that I know for
sure I am on the correct trail.
Thanks!
Dave
On Monday, December 9, 2013 5:20:42 PM UTC-6, Charles Steinkuehler wrote:
The only way to get a BeBoPr+ is to buy it directly from Bas, the
board
designer. His contact e-mail is: [email protected]
<javascript:>
Bas provided some details earlier in this thread:
https://groups.google.com/forum/#!msg/beagleboard/TNmR1_rHl5c/95xpDmbsLoMJ
<https://groups.google.com/forum/#%21msg/beagleboard/TNmR1_rHl5c/95xpDmbsLoMJ>
If you already have a plain BeBoPr board, you can make it a plus
version
by building up the Bridge Board set. There are design files on
github,
and a shared project at OSH-Park, or I have PCBs already
fabricated if
you don't want to wait:
http://bb-lcnc.blogspot.com/p/bebopr-bridge.html
<http://bb-lcnc.blogspot.com/p/bebopr-bridge.html>
On 12/9/2013 11:52 AM, [email protected] <javascript:> wrote:
> How can I get a BeBoPr+ ? None of the pages mentioned above
seem to work.
>
> Dave
>
> On Thursday, August 29, 2013 1:53:28 PM UTC-5, David Anders wrote:
>>
>> Greetings All,
>>
>> just a note that BeBoPr boards are now available from Circuitco
via the
>> boardzoo.com <http://boardzoo.com> website:
>>
>> http://boardzoo.com/index.php/beaglebone/bone-bebopr.html
<http://boardzoo.com/index.php/beaglebone/bone-bebopr.html>
>>
>>
>> Dave Anders
>> Circuitco
--
Charles Steinkuehler
[email protected] <javascript:>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google
Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
