i would also like to purchase a bebopr+* somehow. i await instruction. personal, Texas, USA.
On Thursday, December 12, 2013 9:36:02 AM UTC-6, Bas Laarhoven wrote: > > > Dave, > > Sorry for the short radio silence, I did get your message from the 6th, > and it was on my 'todo' stack. I was trying to find some boards for > shipment but failed and then I had to get a tape-out and PCBs made before > the PCB factory closes for the holidays. > > All BeBoPr+ boards have been sold. It will be replaced by the BeBoPr++ > that will provide the same functionality and more. I hope to make an > announcement soon. The tape-out mentioned before was for the BeBoPr++ > revision 1. I've been testing a BeBoPr++ prototype for a while and it's > working properly, but I decided to improve the PWM output circuitry and add > a connector with an I2C bus. That makes it possible to add some I/O > expansion and/or a small LCD without needing extra hardware or soldering > wires directly to the board. > > Watch the hardware announcements on the forum page! > > -- Bas > > > On 10-12-2013 1:16, [email protected] <javascript:> wrote: > > Yes, I saw that, and I did send email to that addy several days ago, but > no reply so far. > > I will be more patient and give it some more time now that I know for > sure I am on the correct trail. > > Thanks! > Dave > > On Monday, December 9, 2013 5:20:42 PM UTC-6, Charles Steinkuehler wrote: >> >> The only way to get a BeBoPr+ is to buy it directly from Bas, the board >> designer. His contact e-mail is: [email protected] >> >> Bas provided some details earlier in this thread: >> >> https://groups.google.com/forum/#!msg/beagleboard/TNmR1_rHl5c/95xpDmbsLoMJ >> >> If you already have a plain BeBoPr board, you can make it a plus version >> by building up the Bridge Board set. There are design files on github, >> and a shared project at OSH-Park, or I have PCBs already fabricated if >> you don't want to wait: >> >> http://bb-lcnc.blogspot.com/p/bebopr-bridge.html >> >> On 12/9/2013 11:52 AM, [email protected] wrote: >> > How can I get a BeBoPr+ ? None of the pages mentioned above seem to >> work. >> > >> > Dave >> > >> > On Thursday, August 29, 2013 1:53:28 PM UTC-5, David Anders wrote: >> >> >> >> Greetings All, >> >> >> >> just a note that BeBoPr boards are now available from Circuitco via >> the >> >> boardzoo.com website: >> >> >> >> http://boardzoo.com/index.php/beaglebone/bone-bebopr.html >> >> >> >> >> >> Dave Anders >> >> Circuitco >> >> -- >> Charles Steinkuehler >> [email protected] >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] <javascript:>. > For more options, visit https://groups.google.com/groups/opt_out. > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
