Hello, After a pair of weeks of keeping the BBB off, I wanted to connect it again and I found it seems not to work anymore. Well, it does not work partially:
- It does not boot if I power it up using the miniUSB (I have debian installed, with the uBoot loader corrected to allow 1 amp). The power led just flash for a moment and then it goes off. If I press the power button it is just the same: a short flash of the LED, then silence. - It _does_ boot using the barrel connector, but in that case I can't make the ethernet connection work. >From these symptoms I guess something have gone wrong with the USB host chip: It does not power the board, nor control the ethernet interface (it goes up in linux, but it just does not work; the lights in the RJ socket blink as expected though). Is there anything to do before calling the board dead? It worked perfectly when I powered it down, so this (apparent) malfunction has been a nasty surprise... J. PS: I have flashed the NAND and the "native" Angstrom linux behaves just the same: it boots if I power the BBB using the barrel, but the network interface is completely deaf. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
