El 15/12/2013, a les 5.52, Gerald Coley <[email protected]> va escriure:
> The USB is handled by the processor itself. Ethernet under USB power is > always an iffy situation as the power derived form a USB host port on the PC > is marginally enough for Ethernet. Yup, I know, but I'm using a 1A USB power source. The same I used before, by the way... And the ethernet trouble is there when I power the BBB using a 2.4A power source via barrel connector. > > Not sure what the issue here is. he short flash means the PMIC is shutting > down due to an excess current detected on one of the power rails, including > the USB input rail, If it exceeds 500mA the PMIC will shut off. Not sure > about your override of the 500mA setting. That won't make the PC generate > more power. > > Best bet based on what you have described would be an RMA and get it looked > at. I'm not sure it is worth the effort. I guess that would mean sending the card to the US... the parcel cost would probably be over the price of the BBB itself... so I think I will wait for the next batch of cards to get a new one. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
