I will add it to my list of things to look at. Gerald
On Thu, Dec 19, 2013 at 2:18 PM, moore.cyril <[email protected]> wrote: > Hi guys, > > I was having trouble booting my BBB with a LCD connected. I was trying to > confirm that the SYS_BOOT pins, which are also the LCD data pins, matched > what the SRM said. After a little testing I found that the SYS_BOOT pins > never totally matched the SRM even with the LCD disconnected. After a > little more digging I found that there is a discrepancy between the BBB SRM > and the Beaglebone Black Schematics. I am using the Rev A6 schematics dated > September 11, 2013 and the Rev A6 SRM dated October 11, 2013. The sheet 6 > of the schematic shows the SYS_BOOT pins configured to what is on the > Beaglebone Black that I have (Its a rev A5B). On page 104 of the SRM it > shows different resistor numbers and a different configuration of which > ones are DNI. > > Just wanted let you guys know what I found. > > Cheers > > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
