Can I know how much time do you cost on compile the QT 5.1.1 package on ARM 1G board ? I had a bad experience on build Xorg with 266M PowerPc , It cost almost 3 days
2013/12/31 liyaoshi <[email protected]> > If only for Qt , I suggest with Buildroot > > Actually , I was trying to build with this , > https://github.com/liyaoshi/BBB_QT5_WAYLAND > > But ,on Ti platform , I just finished a half , I am targeting on the FSL > platform . > > I just want to say , if you want a tiny QT enviroment , use buildroot . > and it should works > > > 2013/12/31 John Syne <[email protected]> > >> >> >> From: liyaoshi <[email protected]> >> Reply-To: <[email protected]> >> Date: Monday, December 30, 2013 at 6:38 PM >> To: <[email protected]> >> Subject: Re: [beagleboard] Re: Error: cannot find -lstdc++ >> >> Native gcc on board is really not a good idea ,try to build whole QT >> package on your board >> >> Try download linaro toolchain and use cross compiler on your linux x86 >> machine >> >> Cross compiling would be my preference also, but I never managed to get >> this working. In the end, I natively compiled QT5.1.1 on the BBB and it >> works great. >> >> Regards, >> John >> >> >> >> >> >> >> 2013/12/30 <[email protected]> >> >>> I had this same problem - I installed the following from opkg: >>> beagle:/home/solitaire/code/cpp# opkg install libstdc++6 libstdc++-dev >>> libstdc++-staticdev >>> >>> which seemed to fix the problem. >>> >>> >>> On Saturday, September 29, 2012 8:15:48 AM UTC+10, noa wrote: >>>> >>>> I'm trying to compile a simple "Hello world" in beagleboard with the >>>> commend: >>>> g++ -Wall Hello.cpp -o Hello >>>> and get this error: >>>> /usr/lib/gcc/arm-angstrom-linux-gnueabi/4.3.3/../../../. >>>> ./arm-angstrom-linux-gnueabi/bin/ld: cannot find -lstdc++ >>>> collect2:ls returned 1 exit status >>>> What the problem? >>>> Thanks >>>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
