From: liyaoshi <[email protected]> Reply-To: <[email protected]> Date: Monday, December 30, 2013 at 7:11 PM To: <[email protected]> Subject: Re: [beagleboard] Re: Error: cannot find -lstdc++
> Can I know how much time do you cost on compile the QT 5.1.1 package on ARM 1G > board ? > I had a bad experience on build Xorg with 266M PowerPc , It cost almost 3 days I didn¹t have the 1GHz patch installed when I built QT. It took about 40 hours, but I had to fix several build errors along the way. Regards, John > > > 2013/12/31 liyaoshi <[email protected]> >> If only for Qt , I suggest with Buildroot >> >> Actually , I was trying to build with this , >> https://github.com/liyaoshi/BBB_QT5_WAYLAND >> >> But ,on Ti platform , I just finished a half , I am targeting on the FSL >> platform . >> >> I just want to say , if you want a tiny QT enviroment , use buildroot . and >> it should works >> >> >> 2013/12/31 John Syne <[email protected]> >>> >>> >>> From: liyaoshi <[email protected]> >>> Reply-To: <[email protected]> >>> Date: Monday, December 30, 2013 at 6:38 PM >>> To: <[email protected]> >>> Subject: Re: [beagleboard] Re: Error: cannot find -lstdc++ >>> >>>> Native gcc on board is really not a good idea ,try to build whole QT >>>> package on your board >>>> >>>> Try download linaro toolchain and use cross compiler on your linux x86 >>>> machine >>>> >>> Cross compiling would be my preference also, but I never managed to get this >>> working. In the end, I natively compiled QT5.1.1 on the BBB and it works >>> great. >>> >>> Regards, >>> John >>>> >>>> >>>> >>>> >>>> >>>> 2013/12/30 <[email protected]> >>>>> I had this same problem - I installed the following from opkg: >>>>> beagle:/home/solitaire/code/cpp# opkg install libstdc++6 libstdc++-dev >>>>> libstdc++-staticdev >>>>> >>>>> which seemed to fix the problem. >>>>> >>>>> >>>>> On Saturday, September 29, 2012 8:15:48 AM UTC+10, noa wrote: >>>>>> I'm trying to compile a simple "Hello world" in beagleboard with the >>>>>> commend: >>>>>> g++ -Wall Hello.cpp -o Hello >>>>>> and get this error: >>>>>> /usr/lib/gcc/arm-angstrom-linux-gnueabi/4.3.3/../../../../arm-angstrom-li >>>>>> nux-gnueabi/bin/ld: cannot find -lstdc++ >>>>>> collect2:ls returned 1 exit status >>>>>> What the problem? >>>>>> Thanks >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to [email protected] >>>>> <mailto:beagleboard%[email protected]> . >>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>> >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google Groups >>>> "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to [email protected]. >>>> For more options, visit https://groups.google.com/groups/opt_out. >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google Groups >>> "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected] >>> <mailto:beagleboard%[email protected]> . >>> For more options, visit https://groups.google.com/groups/opt_out. >> > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
