On Tuesday, January 14, 2014 2:09:03 PM UTC-7, RobertCNelson wrote:
>
> When you run ./beagleboard.org_image.sh, your final image "base" image
> will be under the deploy directory.
>
> You'll also see a "ship.sh" script, this created the final 3 images i
> uploaded to here:
>
> http://rcn-ee.net/deb/testing/2014-01-10/
>
> Normally i copy these 2 files (ship.sh/debian*-.tar) to an x86 and
> then run ./ship.sh as the xz compression takes a lot of resources
> before uploading..
>
>
Robert,
When my PC was done I ran the ship.sh script in the deploy directory. When
I look at the files I see the following:
dennis@dennis-VirtualBox:~/BBB/image-builder/deploy$ ls -hl
total 3.1G
-rw-r--r-- 1 root root 1.2G Jan 15 09:02
armhf-rootfs-debian-wheezy-2014-01-14-src.tar
-rw-r--r-- 1 root root 1.7G Jan 15 09:46
BBB-eMMC-flasher-debian-7.3-2014-01-14-2gb.img
-rw-r--r-- 1 dennis dennis 254K Jan 15 09:38
BBB-eMMC-flasher-debian-7.3-2014-01-14-2gb.img.xz
-rw-r--r-- 1 dennis dennis 362M Jan 15 09:48
bone-debian-7.3-2014-01-14-4gb.img.xz
-rw-r--r-- 1 dennis dennis 300M Jan 15 09:05
debian-7.3-lxde-armhf-2014-01-14.tar.xz
-rwxr-xr-x 1 dennis dennis 689 Jan 15 09:05 ship.sh
I notice that the file sizes are different than your website which has:
BBB-eMMC-flasher-deb..>
<http://rcn-ee.net/deb/testing/2014-01-10/BBB-eMMC-flasher-debian-7.3-2014-01-10-2gb.img.xz>
10-Jan-2014 10:52 358M
bone-debian-7.3-2014..>
<http://rcn-ee.net/deb/testing/2014-01-10/bone-debian-7.3-2014-01-10-4gb.img.xz>
10-Jan-2014 10:54 358M
debian-7.3-console-a..>
<http://rcn-ee.net/deb/testing/2014-01-10/debian-7.3-console-armhf-2014-01-10.tar.xz>
10-Jan-2014 10:36 302M
My flasher image seems to be substantially smaller than yours. Too small to
be correct.
My debian... file has "lxde" in the name rather than "console", and is
about the same size even though lxde would imply an X11 based system as
opposed to a console only system.
My 4G bone... image file is about the same size as yours.
Where does the armhf... file come from? I tried tracing through the build
scripts, but I couldn't see where it was created.
Do you know why any of these differences exist?
BTW I noticed that the tar command in ship.sh has no "-" before the xf
options. The tar help says it should be there, but perhaps it is not
required.
Thanks again.
Dennis Cote
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
