On Wed, Jan 15, 2014 at 12:42 PM, Dennis Cote <[email protected]> wrote: > > > On Wednesday, January 15, 2014 11:27:10 AM UTC-7, Dennis Cote wrote: >> >> When my PC was done I ran the ship.sh script in the deploy directory. When >> I look at the files I see the following: >> >> dennis@dennis-VirtualBox:~/BBB/image-builder/deploy$ ls -hl >> total 3.1G >> -rw-r--r-- 1 root root 1.2G Jan 15 09:02 >> armhf-rootfs-debian-wheezy-2014-01-14-src.tar >> -rw-r--r-- 1 root root 1.7G Jan 15 09:46 >> BBB-eMMC-flasher-debian-7.3-2014-01-14-2gb.img >> -rw-r--r-- 1 dennis dennis 254K Jan 15 09:38 >> BBB-eMMC-flasher-debian-7.3-2014-01-14-2gb.img.xz >> -rw-r--r-- 1 dennis dennis 362M Jan 15 09:48 >> bone-debian-7.3-2014-01-14-4gb.img.xz >> -rw-r--r-- 1 dennis dennis 300M Jan 15 09:05 >> debian-7.3-lxde-armhf-2014-01-14.tar.xz >> -rwxr-xr-x 1 dennis dennis 689 Jan 15 09:05 ship.sh >> > > > I noticed that the timestamp of the compressed flasher image was before the > timestamp of the uncompressed image. This file was probably created the > first time I ran the ship.sh script. It did some operations and then told be > I was missing some dependencies. I installed the missing tools and then > reran the script. which produced they files above. > > It seems like I should be able to delete the output files and rerun the > script, but it is not clear to me which files are the outputs at this point. > Should I delete the two BBB... flasher image files and the *-4gb.img.xz > file, and uncompress the debian...tar.xz file to get back to square one > before running the ship.sh script again?
This will work around that.. ;) https://github.com/beagleboard/image-builder/commit/d856d07c209f6af4022c95fd8fecf9d1f86514c6 essentially leaving "debian-7.3-lxde-armhf-2014-01-14.tar.xz" as is. As it is now already compressed after the first run and building all the final images off it.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
